Display Panel; Opening The Display Panel; Adjusting Display Panel Brightness; Closing The Display Panel - Fujitsu LifeBook C-4235 User Manual

Fujitsu lifebook c4235: user guide
Hide thumbs Also See for LifeBook C-4235:
Table of Contents

Advertisement

L i f e B o o k C S e r i e s – S e c t i o n T h r e e

Display Panel

Your Fujitsu LifeBook contains a display panel that is
backlit for easier viewing in bright environments and
maintains top resolution through the use of active-
matrix technology.

OPENING THE DISPLAY PANEL

1. Press the latch located at the top of the display panel.
This releases the locking mechanism and raises
the display slightly.
2. Lift the display backwards, being careful not to
touch the screen, until it is at a comfortable
viewing angle. (Figure 3-2)

ADJUSTING DISPLAY PANEL BRIGHTNESS

Once you have turned on your notebook, you may want
to adjust the brightness level of the screen to a more
comfortable viewing level. There are two ways to adjust
the brightness, keyboard and power management utility.
Keyboard
Adjusting the brightness using the keyboard changes the
setting only temporarily.
[FN+F6]: Pressing repeatedly will lower the
brightness of your display.
[FN+F7]: Pressing repeatedly will increase the
brightness of the display.
34
Figure 3-2 Opening the Display Panel
If using AC power your brightness setting is set to it's
highest level by default. If using battery power your
brightness settings is set toit's lowest level by default.
Power Management Utility
Adjusting the brightness using the Power Management
changes the setting permanently.
1. Double-click the Battery Icon in the lower right
corner of your display. This will open the PMSet 98
Properties dialog box.
2. Select the Power Control tab and adjust your
LCD Backlighting to the desired level.
3. Click OK or Apply to permanently change
the settings.
You may need to readjust the brightness level periodi-
cally depending on your operating environment.
The higher the brightness level, the more power the
notebook will consume and the faster your batteries
will discharge. For maximum battery life, make sure
that the brightness is set as low as possible.

CLOSING THE DISPLAY PANEL

1. Holding the edge of your display panel, pull it forward
until it is flush with the body of your notebook.
2. Push down until you hear a click. This will engage
the locking mechanism and prevent your display
panel from opening unexpectedly.
P O I N T
P O I N T
Display Panel Latch

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents