Right-Side Panel Components - Fujitsu Lifebook C1320D User Manual

cotton.book Page 8 Wednesday, August 17, 2005 1:20 PM
L i f e B o o k C S e r i e s N o t e b o o k - S e c t i o n T w o
ExpressCard Eject Button

RIGHT-SIDE PANEL COMPONENTS

The following is a brief description of your LifeBook
notebook's right-side components.
ExpressCard Slot
The ExpressCard slot allows you to insert an Express-
Card. (See PC Cards/ExpressCards™ on page 40 for more
information)
ExpressCard Eject Button
The ExpressCard eject button is used for removing an
ExpressCard from the slot.
PC Card Slot
The PC Card Slots allow you to insert a Type I or Type II
PC Card. (See PC Cards/ExpressCards™ on page 40 for
more information)
PC Card Eject Button
The PC Card eject button is used for removing a PC
Card from the slot.
IEEE 1394 (4-pin) Jack
The 4-pin 1394 jack is used to connect between your
notebook and an IEEE 1394 peripheral such as a digital
8
ExpressCard Slot
IEEE 1394 Jack
SD Card Slot
PC Card Slot
PC Card Eject Button
Figure 2-5. LifeBook notebook right-side panel
video camera. (See IEEE 1394 Port on page 45 for more
information)
DC Power Jack
The DC power jack allows you to plug in the AC adapter
to power your LifeBook notebook and charge the
internal Lithium ion battery.
Secure Digital (SD) Slot
The Secure Digital slot allows you to insert a Secure
Digital (SD) card for data storage. This architecture
allows you to transfer data from a variety of different
digital devices. (See inserting SD Cards on page 39 for
more information)
USB 2.0 Port
The USB 2.0 port allows you to connect Universal Serial
Bus devices. USB 2.0 transfers data at up to 480 Mbps
and is backward-compatible with USB 1.1 devices,
which transfer data at up to 12 Mbps. (See Universal
Serial Bus Ports on page 45 for more information)
S-Video Out Port
The S-Video output is used to transmit a higher resolu-
tion video signal to a compatible TV or VCR.
(See S-Video Out Port on page 47 for more information)
DC Power Jack
USB 2.0 Port
S-Video Out Port