Table of Contents
Advertisement
Using the Eyepiece Shutter
Connecting the Remote Switch
You can connect Remote Switch RS-80N3 or Timer Remote Controller
TC-80N3 (both sold separately) or any EOS accessory equipped with
an N3-type terminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.
If you take a picture without looking at
the viewfinder, light entering the
eyepiece can throw off the exposure. To
prevent this, slide the eyepiece shutter
lever as shown by the arrow to shutter
the eyepiece.
You need not shutter the eyepiece during
Live View shooting or movie shooting.
Open the terminal cover.
1
Open the upper terminal cover.
Connect the plug to the remote
2
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
plug's silver part and pull out.
Bulb Exposures
117
Advertisement
Table of Contents
