Unscrew
and remove
2.
screws for the transit bolts with a
WAF 13 wrench.
Pull the power cable out of the
3.
holder.
Remove the 4 sleeves.
4.
all 4
Put on the 4 cover caps.
5.
Press down on the 4 cover caps.
6.
4.5 Connecting the appliance
Connecting the water inlet hose
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Installation and connection en
WARNING
15