Canon PowerShot A310 User Manual page 101

RAW You attempted to play back an image recorded in the RAW format.
You attempted to play back an image that was recorded in a special format
Unidentified Image (proprietary format used by the camera of another manufacturer) or a movie
that was taken with another camera.
You attempted to magnify an image which was photographed with another
Cannot magnify! camera, recorded in a different format, or edited on a computer or a movie
clip.
You attempted to rotate an image which was photographed with another
Cannot rotate! camera, recorded in a different format, or edited on a computer or a movie
clip.
Incompatible WAVE A sound memo cannot be added to this image since the format of the existing
format sound memo is incorrect.
Cannot register this You attempted to register an image recorded with another camera or a movie
image! clip as a start-up image.
Protected! You attempted to erase protected image or movie clip.
Too many images have been marked for printing or transferring. Cannot
Too many marks!
process any more.
Cannot mark image You attempted to set the print settings for a non-JPEG file.
Camera malfunctioned. Turn off the power and turn on again, then re-shoot
or play back. If the same message recurs frequently, the camera may be
damaged. Note down the error number [xx] and take the camera to a
Exx
Customer Support Help Desk. If this message appears immediately after you
have taken a shot, the camera may not have shot the image. Switch to the
Playback mode and check whether the image was actually recorded.
List of Messages
99