Radio Components: Wireless Lan/Bluetooth/Umts; Switching The Radio Components On And Off - Fujitsu Siemens Computers ESPRIMO Mobile D9500 Easy Manual

Professional notebook
Hide thumbs Also See for ESPRIMO Mobile D9500:
Table of Contents

Advertisement

Ports and operating elements

Radio components: Wireless LAN/Bluetooth/UMTS

UMTS
Bluetooth
Wireless LAN
The installation of a wireless LAN module not approved by Fujitsu
Siemens Computers GmbH voids the permits issued for this device
(see chapter

Switching the radio components on and off

Start the WirelessSelector using the radio components EasyLaunch key or
the key combination
The WirelessSelector allows the radio components activated in BIOS Setup to
be switched on and off individually.
UMTS
UMTS
Bluetooth
Bluetooth
Wireless LAN
Wireless LAN
If you switch off the radio components, the Bluetooth module, UMTS and wireless
LAN transmission unit (antenna) will also be switched off.
You can enable or disable the radio components individually.
BIOS Setup allows you to specify which radio components can be switched on and off
using the EasyLaunch key or the key combination
that have been activated in BIOS Setup can be switched on and off using the EasyLaunch
key or the key combination
BIOS setup cannot be controlled using the EasyLaunch key or the key combination.
You can also activate and deactivate the radio components individually in the BIOS Setup.
Pay attention to the additional safety notes for devices with radio
components provided in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
More detailed information on how to use Bluetooth can be found on
the "Drivers & Utilities" CD/DVD.
You can obtain more information on UMTS from your service provider.
22
"Technical data", Page
Fn
+
F1
.
Fn
30).
► Press the EasyLaunch button to start
the WirelessSelector.
or
► Press the key combination
to start the WirelessSelector.
The radio component indicator will be
illuminated when one or more radio
components is switched on.
Fn
+
F1
. Conversely, components that are deactivated in
A26391-K230-Z120-1-7619, edition 2
+
F1
. Only those components
Fn
+
F1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents