Table of Contents
Advertisement
<Password protection>
Password protection is available to prevent unauthorised access to the service
menu by untrained persons.
From the service menu use F1 and F2 buttons to scroll through list until
1.
is highlighted.
.
Press CONFIRM.
When password input screen is displayed use buttons F1 and F2 to move left
3.
and right between the four digits, F3 to lower the selected digit by 1, and F4 to
increase the selected digit by 1.
When you have input your password press CONFIRM.
4.
The password verify screen is displayed.
5.
To verify your new password press button F3.
6.
Your password is now set and the completion screen is displayed.
7.
8.
To return to service menu press MENU or BACK button.
<Resetting the password>
If you forget the password you entered, or have to service a unit somebody else
installed, you can reset the password to the factory default of 0000.
From the main settings menu scroll down the functions until Service Menu is
1.
highlighted.
.
Press CONFIRM.
You will be prompted to enter a password.
3.
Hold down buttons F3 and F4 together for 3 secs.
4.
You will be asked if you wish to continue and reset the password to default set-
5.
ting.
6.
To reset press button F3.
The password is now reset to 0000.
7.
<Manual reset>
Should you wish to restore the factory settings at any time you should use the
manual reset function. Please note this will reset ALL functions to the factory de-
fault settings.
From the service menu use F1 and F2 buttons to scroll through list until Manu-
1.
al Reset is highlighted.
.
Press CONFIRM.
3.
The manual reset screen is displayed.
4.
Choose either Manual Reset for FTC3 or main controller.
Press F3 button to confirm manual reset of chosen device.
5.
41
Password input screen
Password verify screen
Completion screen
Hide quick links:
Advertisement
Table of Contents
