Table of Contents
Advertisement
TV operation
To select the Audio/Video input source
To view a signal from another device connected to your TV, such as a Blu-ray player, press
INPUT, then press ▲ or ▼ to select the desired input, then press SELECT.
CH
/
Press and release CH
For proper operation, before selecting channels, they should be set into the memory. See
"Channels setup" on page 23.
INFO
Press INFO to display the current information on the screen.
When the TV receives a digital signal, the digital information will appear.
• Channel number
• Channel label (if present)
• Parental Control
• Program guide
• Resolution
Press INFO again to clear the display.
LAST CH
This button allows you to go back to the last channel selected by pressing LAST CH. Press
LAST CH again to return to the channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound will be silenced and MUTE icon will
appear on the screen. The sound can be switched back on by pressing this button again or
by pressing the VOL (VOLUME ) + button.
/ . The TV automatically stops at the next channel.
• DTV Signal condition
• Broadcast program name
• Signal Type
• Current date and time
• Audio language
(continued)
17
Advertisement
Table of Contents
