Fujitsu Siemens Computers AMILO Pro V8010 Operating Manual page 56

Security functions
With Notice: Changes have been saved you receive a confirmation that the new password has been
saved.
► To assign the user password, mark the field Set User Password and proceed exactly as when
configuring the supervisor password.
If you do not want to make any other settings, you can exit BIOS Setup.
► Select the Exit Saving Changes option in the Exit menu.
The notebook is rebooted and the new password is effective. If you now want to open the BIOS Setup,
you must first enter your supervisor or user password. Please note that you only have access to a
few BIOS settings with the user password.
Change supervisor or user password
► Open the BIOS Setup again and there the Security menu.
When changing the password, proceed exactly as for password assignment.
You can only change the supervisor password when you have logged into the BIOS Setup with the
supervisor password.
Cancelling passwords
To cancel a password (without setting a new password) run the following steps:
► Call BIOS Setup and select the Security menu.
► Mark the Set User Password or Set Supervisor Password field and press the Enter key.
With Enter new Password you will then be asked to enter a password.
► Press the Enter key twice.
► Select the Exit Saving Changes option in the Exit menu.
Your notebook will now restart and the password is cancelled.
With the supervisor password you simultaneously deactivate the user password.
46 A26391-K168-Z120-1-7619, edition 2