Hardware Setting; Nomenclature Of Product Components - Contec GPIB-FL2-USB Reference Manual

3. Hardware Setting

This section describes how to set up the product and how to connect it to a PC.

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.
No. Name
1
Setting Switches
2
LED Indicator
3
Interface Connector
4 Connecting Screws
5 USB Connector
— —
Setup
GPIB-FL2-USB Reference Manual
These are switches to distinguish modules.
This indicates the state of the product.
This is a 24-pin GPIB connector (Female)
These are screws to connect GPIB cable or a remote device.
This is a USB connector for type-A.
— 22 —
Description