Welcome to be user of Hopeland RFID products. Thanks for choosing Hopeland’s 12/24-port Fixed RFID Reader HL7206C12/24. We believe our device will bring convenience for your work.
1. Technical Specification 1.1 Feature HL7206C12/24 is a high performance 12/24 antenna port fixed UHF RFID reader; support ISO18000-6C/6B protocols. The work frequency includes China standard dual frequency 920MHz ~ 925MHz and 840MHz~845MHz, FCC 902MHz ~ 928MHz and ETSI 865MHz ~ 868MHz.
Support: Wiegand 26, 34, 66 Power supply: 10V ~ 30V(power capacity is not less than 60W) Power adapter: AC input 100V ~ 240V, 50Hz ~ 60Hz DC output: 24V/2.5A 1.2.3 Operational environment Working environment: -20℃~+70℃ Relative Humidity: 5%RH~90%RH(+25℃) FCC warning:...
1.41kg 2.3 Illustration of LED display Image2-3 Sketch map of C12’s LED indicator Image2-4 Sketch map of C24’s LED indicator HL7206C12 LED indicator panel describe as below Form 2-1: Form 2-1 HL7206C12 LED indicator description LED Mark NO. Mark NO.
Page 9
HL7206C24 LED indicator panel describe as below Form 2-2: Form 2-2 HL7206C24 LED indicator description LED Mark NO. Mark NO. Status description POWER Power indicator Keep bright indicates power supply working normally Status indicator Keep bright indicates tag be read bi-colour light, red Indicates antenna 1 is working, ANT1/2 Antenna 1/2 indicator...
2.4 Interfaces 2.4.1 Power supply, communication and I/O interface Image 2-5 Sketch map of reader’s power supply, communication and I/O interface Details are shown in form 2-3 Form 2-3 Reader’s power supply, communication and I/O interface Interface ID Interface Name Detail description POWER Power supply...
Page 11
I/O Interface definition as follow form 2-4 Form 2-4 I/O Interface definition Pin ID Pin Description Relay 1# output; DC_MAX: 30V, 2A; AC_MAX: 125V, 0.3A; logic '0' indicates open circuit, logic '1' indicates closed, default is open circuit. Relay 1# output; DC_MAX: 30V, 2A; AC_MAX: 125V, 0.3A; logic '0' indicates open circuit, logic '1' indicates closed, default is open circuit.
2.4.3 Coaxial RF Feeder Cable (optional) Image 2-7 schematic diagram of feeder line RF cable TNC(Reverse polarity, internal thread, inner pin) connector connects with reader antenna TNC connector, RF cable SMA connector connect with external circular polarization antenna’s SMA connector, cable maximum length is 5m, impedance 50Ω, insertion loss is less than 2dB, high-performance cable can also be selected, and the length can be increased appropriately, insertion loss is less than 2dB.
3. Installation 3.1 Notes To ensure the normal and stable operation of the device and your personal property and safety, please carefully read the following notes before install HL7206C reader and writer: 1. Firstly, check whether the power socket is connected to the ground, and to see whether the local power supply voltage is in accordance with the applicable voltage range of the reader;...
3.3.3 PC connection The device provides special adapter cable, including interface of network, serial and power, RS232 interface is for short distance communication (less than 10m), through the DB9 connector and the PC serial port connection to realize the communication of PC and the device, RJ45 network port used for long distance communication (less than 80m), connect PC with extend network cable.
Check if the selected COM port is right. The network port cannot connect: The default IP address and port of HL7206C12/24 is 192.168.1.116:9090 ensure the IP address of the PC and reader in the same network segment, such as "192.168.1.XXX" then you can connect to the reader, if you forget the IP address of the device, you can reset the reader ’s IP address through...
5. Package 5.1 Package Imag5-1 Carton box size 315X292X82mm Carton box size: 5.2 Accessories In order to facilitate the storage and transportation in near future, the packing box and the packing material should be kept properly after unpack. Besides of the device in the box, accessories equipped with the reader are also included in, please check the product packing list to confirm whether the product and accessories are complete, if any discrepancies or damage, please contact with the after-sale service in time.
Network cable unit Included 20351000000478 RS232 black cable Included 20351000000036 USB cable Included 20420000001651 Warranty card Included 20420000001650 Certificate of approval Included 5.3 Storage environment HL7206C12/24 fixed reader should be stored in below conditions: ☆ Environment temperature:-40℃~+85℃ ☆ Relative humidity:5% RH~90%RH...
Thus the real product may be not in accordance with this manual. Generally, we will provide timely amendments to this manual. If it’s not provided timely, please consult our service department. Shenzhen Hopeland Technologies Co., Ltd. Email: support@hopelandrfid.com...
Page 19
3, the software of this product can be upgraded freely, users can be training in our company for free. 4, Will be charge appropriately if the user don’t have a warranty card. 5, Users will need to fill out the warranty card for repair service, and sent back to Hopeland.
Need help?
Do you have a question about the HL7206C12 and is the answer not in the manual?
Questions and answers