Fujitsu 690Tx User Manual page 72

S e c t i o n T h r e e
Table 3-2 Fields, Options and Defaults for the Master Adapter Submenu
Menu Field Options
Type: Auto; None;
CD-ROM; User.
Cylinders: (Available to A number between
change only when Type = 0 and 65,535.
User. Displayed when
Type =Auto and a
hard drive is detected.
Not displayed for
other selections.)
62
Default Description
[Auto] Allows you to configure the interface for almost any drive. When
Auto is selected the BIOS detects the control parameters from the
drive itself and displays them. The user can not change any o f the
other menu items when Auto is selected. The None selection is to
use if there is no drive connected to that Adapter. No parameters
are displayed. The CD-ROM selection lets you set the parameters
that are displayed. The User selection lets you set the parameters
that are displayed except the total capacity which is d etected
and displayed.
— Sets the number of cylinders for the drive. This field can be
changed by incrementing (pressing the Spacebar or Hyphen key)
or by typing in the number.