Connecting To A Computer; Connecting To A Computer Via Ieee 1394 - FujiFilm Finepix S2 Pro Owner's Manual

CONNECTING TO A COMPUTER

Install the software before connecting the camera to a computer.
The available functions differ depending on the camera's PC mode settings, as shown below.
Bundled "software for FinePix"
CD-ROM
FinePix S2 Pro
ＰＣ ＰＣ ＭＯＤＥ ＭＯＤＥ ＵＳＢ ＵＳＢ ＤＯＷＮＬＯＡＤＩＮＧ ＤＯＷＮＬＯＡＤＩＮＧ ＰＣ ＰＣ ＭＯＤＥ
xAllows photographed images to be saved on a computer
xCCD-RAW files can be played back and converted to other
formats.
xVoice memos can be played back.
Special USB cable
Computer
USB driver
FinePixViewer
h Refer to the User's Guide for the optional Hyper-Utility Software HS-S2 for more information
on the photography modes.
h This description covers the downloading modes.
Connecting to a Computer
To connect the camera to a computer via a USB port, the computer must be equipped with a
USB port as a standard feature. (Operation is not guaranteed for USB ports added later.) To
connect via an IEEE1394 port, check that the interface is OHCI compliant and then refer to the
table below to check whether it is supported by your operating system.
I Operating System Compatibility Chart (Windows)
OS
Windows 98 SE
Windows 98
(Second Edition)
Connection type
✕
IEEE1394
✽1
USB
u
✽1 Can be used by installing the driver from the bundled CD-ROM.
✽2 Select Windows Update from the Start button menu and update the 1394 device driver (Your system must be
capable of connecting to the Internet).
I Operating System Compatibility Chart (Macintosh)
OS
Mac OS 8.6 Mac OS 9.0.4
Connection type
✕
IEEE1394
✽1
USB
u
✽1 Can be used by installing the driver from the bundled CD-ROM.
✽2 Cannot be used even when installed as a standard feature, but can be used by downloading and installing the free
100
update to Mac OS 9.1. Contact Apple Computers (http://www.apple.com) for information on software updates.
Optional "hyper-Utility
software"
ＰＣ ＰＣ ＭＯＤＥ ＭＯＤＥ １３９４ ＳＨＯＯＴＩＮＧ １３９４ ＳＨＯＯＴＩＮＧ
ＭＯＤＥ １３９４ ＤＯＷＮＬＯＡＤＩＮＧ １３９４ ＤＯＷＮＬＯＡＤＩＮＧ
xAllows the camera to be
controlled and shots to be
taken from a computer.
xImages photographed with
the camera can
automatically saved on the
computer.
IEEE 1394 cable
Shooting driver
Shooting Software
: Can be connected ✕: Cannot be connected
u
Windows Me
Windows 2000
(Millennium Edition)
✽2
u u u
u u u
: Can be connected ✕: Cannot be connected
u
Mac OS 9.1 Mac OS 9.2.1
✽2
✕
u u
u u u

CONNECTING TO A COMPUTER VIA IEEE 1394

1
1 0
0 3
be
2
0 1
Camera
G
!
In Windows XP and Mac OS X, automatic startup must be set up the first time you connect.
G
!
The first time you connect, the media may take a few moments to mount.
G
!
Take care to ensure that the cable is connected the right way round and that the plugs are firmly inserted all
the way into the sockets.
Camera Operations
Windows XP
h The Access lamp blinks when the camera
and computer are exchanging data.
u
h "1394 DOWNLOADING" is displayed on
rear display panel.
u
h The Auto Power Off function is disabled
while the camera is connected to a
computer.
Mac OS X
G
u !
When replacing the media, always switch the camera
and computer off first using the procedure described
u
on P.103.
G
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.103 for information
on the disconnection procedure.
1Load the media containing your shots into the
0 2
camera.
2Switch the camera on.
3Select "1394 DOWNLOADING" as the "PC
MODE" setting in SET–UP (➡P.89).
4Set the power switch to "OFF" to switch the
camera off.
G
!
Refer to the operating system compatibility charts on
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
P.100 and check that your operating system supports the
ＦＲＡＭＥ ＮＯ． ＦＲＡＭＥ ＮＯ． ＯＦＦ ＯＦＦ
IEEE1394 interface.
G
ＰＣ ＭＯＤＥ ＰＣ ＭＯＤＥ １３９４ ＤＯＷＮＬＯＡＤＩＮＧ １３９４ ＤＯＷＮＬＯＡＤＩＮＧ
!
Use of the AC power adapter (sold separately) is
ＢＥＥＰ♪ ＢＥＥＰ♪ ＬＯＷ ＬＯＷ
recommended when connecting the camera to a
ＬＡＮＧＵＡＧＥ ＬＡＮＧＵＡＧＥ ＥＮＧＬＩＳＨ ＥＮＧＬＩＳＨ
computer.
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＳＥＴ
G
!
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ ＯＫ ＯＫ If a SmartMedia and Microdrive are both loaded into the
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ camera at the same time, the media selected in the
"MEDIA" setting in SET–UP is used (➡"Setup", P.89).
1Switch your PC on.
0 2
IEEE
2Connect the camera to the computer using
1394 socket IEEE IEEE
the bundled IEEE1394 cable.
1394 socket 1394 socket
3Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera
(➡P.103).
PC
PC Operations
h If FinePixViewer is installed, it starts up
automatically.
✽ Screen for
Windows 98 SE
h A removable disk icon appears and you
can use your PC to transfer files to and
from the camera.
If the above operations do not occur, you do
not have the required software programs or
drivers installed on your PC. Refer to the
Software Quick Start Guide booklet and
complete the required PC setup procedures.
Then reconnect the camera to your PC.
Windows Macintosh
6
101