Loading Door Lock - Beko WY96044W User Manual

4.3.11 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in
cases when the water level is unsuitable.
"Door Locked" symbol appears on the display when the loading door is locked.
C
If the Remote Control Function is selected, the door will be locked. In order to open the door you must deactivate Remote
Start Function by either pressing the Remote Start button or changing the program position.
Opening the loading door in case of power failure:
C
In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading
door manually.
A
WARNING:
machine.
4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
Washing Machine / User's Manual
To avoid any water overflow before opening the loading door, make sure there is no water left inside the
•
Open the pump filter cap.
•
Release the loading door emergency handle located at the rear side of
the filter cap.
•
Pull down the loading door emergency handle once and open the loading
door. After opening the loading door, re-insert the loading door emergency
handle.
•
If the loading door does not open, try again by pulling down the handle.
:
25 / EN