Subscribe to Our Youtube Channel
Related Manuals for Nubert A-125
Summary of Contents for Nubert A-125
- Page 1 A-125 Active speaker Stereo set Safety instructions Operating manual Technical data Warranty terms...
-
Page 2: Device Approval And Conformity With Ec Directives
Nubert electronic GmbH does not assume any liability for damages caused by improper use. -
Page 3: Connection Instructions
• Should the loudspeaker come into contact with liquids or should objects have • Do not operate or store the remote control and battery in locations with high got inside, please unplug the mains plug immediately and contact Nubert elec- humidity or high or low temperature! tronic GmbH (info@nubert.de)! -
Page 4: Unpacking And Scope Of Delivery
Hence our tip: When your new speakers arrive on a cold winter’s day, just give them a few hours to acclimatise. Your Nubert speakers will thank you with the superior sound quality you have come to expect from Cloth grille... - Page 5 07/2020 · nuBox A-125 Infrared receiver and the status LED Master Speaker (right) 2 Cloth grilles Slave speaker (left) Mains cable, 1.8 m Fibre optic cable with Master-Slave loudspeaker Remote control TOS-Link plugs, 1.5 m interconnect cable, 3 m with battery...
-
Page 6: Connect The Power Cable
Setup Connections The nuBox A-125 are high-quality, very neutral active stereo loud- Caution! All connections to the A-125 must be made before you speakers. They impress with an extremely homogeneous, precise, connect the loudspeaker to the mains! and „direct“ sound reproduction with the finest resolution in the entire frequency spectrum. - Page 7 07/2020 · nuBox A-125 Master-Slave loudspeaker interconnect cable, 3 m SPEAKER OUT TO LEFT SPEAKER IN FROM RIGHT HDMI Output to the Slave Input from the Master loudspeaker loudspeaker OPTICAL COAX Mains connector Master loudspeaker (right) Slave loudspeaker (left) HDMI-ARC input To connect the Audio Return Channel of a compatible TV with an HDMI cable.
-
Page 8: Status Led
The nuBox A-125 speakers can only be operated by the supplied remote control: on/off Use the on/off key to activate the A-125 or switch it to standby mode. If the loudspeaker is turned off with the remote control, auto- matic switch-on will be deactivated. (Exception: HDMI input) volume and mute The volume can be adjusted with the volume keys ... -
Page 9: Operation And Functions
• However, this function is not available for Bluetooth devices. Further applications • At the other inputs, Auto Power On is only active if the A-125 is set to standby mode by the Auto Power Off function. Operation with a subwoofer... -
Page 10: Technical Data
Radio frequency bands 2402 - 2480 MHz The tweeters of all Nubert loudspeakers are equipped with a pro- Radio transmitting power 7.8 dBm / 6.0 mW tective grille so that they can also be wiped off with low pressure. If... - Page 11 07/2020 · nuBox A-125...
-
Page 12: Warranty Terms
Old appliances can also be returned to us directly in our shops or shipped back to us for disposal. Please send an Email to info@nubert.de for a free return shipping label.
Need help?
Do you have a question about the A-125 and is the answer not in the manual?
Questions and answers