Table of Contents
Advertisement
Auto
Fragment
To specifies the maximum size of packet during the
Threshold
data transition. The lower values you set, the worst
performance it will be.
If the packet size is smaller the RTS threshold, the
RTS
wireless router will not send this packet by using the
Threshold
RTS/CTS mechanism.
Beacon
The period of time how long a beacon is
Interval
broadcasted.
The "Data Rate" is the data packets limitation this
wireless router can transmit. The wireless router will
Data Rate
use the highest possible selected transmission rate
to transmit the data packets.
It defines the length of CRC block in the frames
during the wireless communication. "Short
Preamble
Preamble" is suitable for heavy traffic wireless
Type
network. "Long Preamble" provides much
communication reliability
If you enable "Broadcast SSID", every wireless
station located within the coverage of this wireless
Broadcast
router can discover this wireless router easily. If you
SSID
are building a public wireless network, enabling this
feature is recommended. Disabling "Broadcast
SSID" can provide better security.
To enables multiple AP to communicate and pass
IAPP
information regarding the location of associated
Stations.
Some 802.11g wireless adapters support 802.11g
protection, which allows the adapters searches for
802.11g
802.11g singles only. Select the "Disabled" to
Protection
disable supporting 802.11g protection or select
"enable" to support this function.
Click the <Apply Changes> button at the bottom of the screen to save the above configurations.
You can now configure other advance sections or start using the router.
The wireless client can associate
with this wireless router by using
any one of these two Modes.
20
Advertisement
Table of Contents
