Netronix W440A User Manual page 23

Click <Apply changes> button at the bottom of the screen to save the
above configurations. You can now configure other advance sections or
start using the router (with the advance settings in place)
ž Active Wireless Client Table
This is the window that pops up after clicking the "Show Active Clients"
button.
MAC Address MAC address of this active wireless station.
Tx Packet
The number of transmitted packets that are sent out
from this active wireless station.
Rx Packet The number of received packets that are received by
this active wireless station.
TX Rate The transmission rate
Power Saving
Shows if the wireless client is in Power Saving mode
Expired Time This is the time in second before dissociation. If the
wireless keeps idle longer than the expired time, this
wireless router will dissociate it. The wireless client
station has to associate again when it is active.
Refresh Refresh the "Active Wireless Client Table".
Close Close the "Active Wireless Client Table".
18