Frigidaire GLGT1142CS0 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Frigidaire Manuals
  4. Washer/Dryer
  5. GLGT1142CS0
  6. Installation instructions manual
Frigidaire GLGT1142CS0 Installation Instructions Manual

Frigidaire GLGT1142CS0 Installation Instructions Manual

Full size laundry center gas & electric
Hide thumbs Also See for GLGT1142CS0:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Operating Instructions
Before beginning installation, carefully read these instructions. This will simplify the installation
and ensure the laundry center is installed correctly and safely. Leave these instructions near the
laundry center after installation for future reference.
NOTE:
The electrical service to the laundry center must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70 , or in Canada, the Canadian
Electrical Code, CSA C22.1
NOTE:
The gas service to the laundry center must conform with local codes and ordinances and
the latest edition of the National Fuel Gas Code ANSI Z223.1/NFPA 54, or in Canada, the Canadian
Natural Gas and Propane Installation Code, CSA B149.1.
NOTE:
T
he laundry center is designed under ANSI Z21.5.1 or ANSI/UL 2158- CAN/CSA C22.2 (latest
edition) for HOME USE only. This laundry center is not recommended for commercial applications
such as restaurants or beauty salons, etc.
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use
any phone in your building.
Clear the room, building or area of all
occupants.
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
If you cannot reach your gas supplier, call the
fire department.
Installation and service must be preformed by a
qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
Installation
Instructions
Full Size Laundry Center
Contents
Contents
Contents
Contents
Contents
SUBJECT
Gas & Electric
PAGE
2
2
2
2
3
4
4
4
5
5
6
6
7
7
8
P/N131661700B (0404)

Advertisement

Table of Contents
loading

Related Manuals for Frigidaire GLGT1142CS0

Summary of Contents for Frigidaire GLGT1142CS0

  • Page 1: Table Of Contents

    Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the laundry center is installed correctly and safely. Leave these instructions near the laundry center after installation for future reference. NOTE: The electrical service to the laundry center must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70 , or in Canada, the Canadian Electrical Code, CSA C22.1 NOTE:...

  • Page 2: Pre-Installation Requirements

    POWER SUPPLY -3 wire, 120 volt single phase, 60 Hz, Alternating Current. POWER SUPPLY CORD -The gas laundry center is equipped with a 120 volt 3-wire power cord. Hot and cold water faucets MUST be installed within 42 inches (106.68 cm) of your laundry center’s water inlet.

  • Page 3: Exhaust System Requirements

    EXHAUST SYSTEM REQUIREMENTS Use only 4 inch (10.16 cm) diameter (minimum) rigid or flexible metal duct and approved vent hood which has a swing-out damper(s) that opens when the dryer is in operation. When the dryer stops, the damper(s) automatically closes to prevent drafts and the entrance of insects and rodents.

  • Page 4: Gas Supply Requirements

    1. A laundry center installed in a bedroom, bathroom, recess or closet, MUST be exhausted outdoors. 2. No other fuel burning appliance shall be installed in the same closet as the Gas laundry center. 3. Your laundry center needs the space around it for proper ventilation.

  • Page 5: Rough-Ln Dimensions

    ROUGH-IN DIMENSIONS ROUGH-IN DIMENSIONS ROUGH-IN DIMENSIONS ROUGH-IN DIMENSIONS ROUGH-IN DIMENSIONS 12 ½ IN. (31.75 CM) VENT 75 ½ IN. (191.77 CM) ELECTRICAL CONNECTION 54 5/16 IN. WATER INLETS (137.95 CM) (REAR) 43 IN. (109.22 CM) DRAIN OUTLET (REAR) 3 ¾ IN. (9.52 CM) 27 IN.

  • Page 6: Electrical Installation

    ELECTRICAL INST ELECTRICAL INST ELECTRICAL INSTALLA ELECTRICAL INST ELECTRICAL INST ALL ELECTRIC ALL ELECTRIC Laundry Centers Laundry Centers ALL ELECTRIC ALL ELECTRIC ALL ELECTRIC Laundry Centers Laundry Centers Laundry Centers WARNING he following are specific requirements for proper and safe electrical installation of your laundry center. Failure to follow these instructions can create electrical shock and/or a fire hazard.

  • Page 7: 4-Wire Connections

    2. The laundry center is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from the plug. ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS...

  • Page 8: Replacement Parts

    7. GAS CONNECTION (Gas laundry centers only) a. Remove the shipping cap from gas pipe at the rear of the dryer. NOTE: DO NOT connect the laundry center to L.P. gas service without converting the gas valve. An L.P. conversion kit must be installed by a qualified gas technician.

Table of Contents