Advertisement
range of the sensor when choosing a mounting location.
Some examples of ideal mounting locations:
1. On a wall to detect any leaks on the floor of a room.
2. Inside or on top of a rack to detect any leaks near the rack.
For most mounting scenarios, the MT12 has flexible options to provide quick and simple mounting. The instructions are
as follows:
1. Start by removing the battery compartment cap and inserting two AA batteries into the battery compartment.
2. In order to mount the sensor on different locations, there are three options:
a. Screws - The mounting plate can be directly screwed onto the wall.
b. VHB tape - Double-sided VHB tape can be used to stick the mounting plate on any type of surface.
c. Magnet - Stick the magnet on any surface and the mounting plate can be stuck to the magnet.
3. Once the mounting plate is on the desired surface, slide the MT12 sensor onto the plate and use the included Torx
screw to secure the sensor.
3
Advertisement
