Advertisement
NOTE:
There are no serviceable parts in this unit. Do not attempt to disassemble.
WARNING:
Doing so will create fire and/or shock hazards.
APPLIANCE COMPONENTS
Handle
Remote controller
and storage slot
Remote Control
CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT POSITION ONLY. DO NOT
LAY FAN ON ITS SIDE OR IN ANY OTHER POSITION. DOING SO MAY CAUSE
DAMAGE TO THE FAN AND/OR PERSONAL PROPERTY. DO NOT USE THIS FAN
WITHOUT ITS BASE.
FAN BASE ASSEMBLY
1. Remove all items of packing from the tower fan.
2. Pass the power cord through the middle of the two base pieces.
3. Position base piece onto the support posts of the other base piece to create the base
assembly.
4. Turn the tower body upside down position the base assembly onto the pedestal tube.
Ensure that the pedestal tube is sitting flush in the base assembly.
5. Screw the base assembly onto the pedestal tube with the supplied screws.
Never use this fan with any solid-state speed control device.
Aroma
compartment
and Aroma box
2
Top Control Panel
Blue Light
Remote Receiver
LED Display
Back Cover
Air Outlet
Front Housing
Fan Base
Advertisement
