NI PXIe-4137 Safety, Environmental, And Regulatory Information

SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION
PXIe-4137
PXIe, ±200 V, ±1 A (DC)/±3 A (Pulsed) Precision System PXI Source Measure Unit
Read this document before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring
instructions in addition to requirements of all applicable codes, laws, and standards. Visit
specifications, pinouts, and instructions for connecting, installing, and configuring your system.
Note In this document, the PXIe-4137 (40W) and the PXIe-4137 (20W) are referred to inclusively as the PXIe-4137 . The information in this
document applies to all versions of the PXIe-4137 unless otherwise specified. To determine which version of the module you have, locate the device
name in one of the following places:
• In MAX—The PXIe-4137 (40W) shows as PXIe-4137 (40W), and the PXIe-4137 (20W) shows as PXIe-4137.
• Device front panel—The PXIe-4137 (40W) shows PXIe-4137 40W System SMU, and the PXIe-4137 (20W) shows NI PXIe-4137 Precision System
SMU on the front panel.

Icons

Refer to the following descriptions if one of these icons is marked on your product or used in this guide.
Notice Take precautions to avoid data loss, loss of signal integrity, degradation of performance, or damage to the product.
Caution Take precautions to avoid injury. Consult the product documentation for cautionary statements when you see this icon printed on the
product. Cautionary statements are localized into French for compliance with Canadian requirements.
Caution: Possibility of Electric Shock Take precautions to avoid electrical shock.
Caution: Hot Surface Take precautions to avoid physical burns.

Safety Guidelines

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention Suivez toutes les instructions et respectez toutes les mises en garde de la documentation d'utilisation. L'utilisation du produit de toute autre
façon que celle spécifiée risque de l'endommager et de compromettre la protection de sécurité intégrée.
Caution If the product has been in use, it may exceed safe handling temperatures and cause burns. Allow the product to cool before handling.
Attention Si le produit a été utilisé, il peut avoir atteint des températures trop élevées pour être manipulé en toute sécurité, ce qui peut provoquer des
brûlures. Laissez le produit refroidir avant de le manipuler.

Safety Guidelines for Hazardous Voltages

Caution Ensure that hazardous voltage wiring is performed only by qualified personnel adhering to local electrical standards.
Attention S'assurer que le câblage à tension dangereuse est effectué par du personnel qualifié respectant les normes électriques locales.
Caution Do not mix hazardous voltage circuits and human-accessible circuits on the same product.
Attention Ne pas combiner des circuits avec des tensions dangereuses et des circuits accessibles aux personnes sur le même produit.
Caution When product terminals are hazardous voltage LIVE, you must ensure that devices and circuits connected to the product are properly
insulated from human contact.
Attention Lorsqu'une haute tension dangereuse est appliquée aux bornes du produit, vous devez vous assurer que les appareils et les circuits auxquels
il est connecté sont correctement isolés de tout contact humain.
ni.com/manuals for more information about your product, including