Bosch rexroth Nexo Manual page 138

Bosch Rexroth AG | Tightening Technology
138/279
Table 7–40:
Parameter
ID code part 4
Data length revision 004 (= data length revision 004 + data length revision 003)
7.5.3.9 System error messages
MID 0070 Resulting system errors subscription
Sent by: superordinate computer
A subscription for the system errors that can be reported on the tightening controller.
Note: After successful subscription, a status message (MID 0076) will be sent to the superordinate computer for
each active error in the controller.
Revision: 001
Data field: is empty, 0 bytes
Possible responses
Command accepted
Command error
MID 0071 Upload resulting system errors
Sent by: Tightening controller
If a system error occurs in the tightening controller, it will be reported to the superior computer.
Note: -
Revision:
Data field: Data 33 bytes
Possible response: none
MID 0071 revision 001
Table 7–41:
Parameter
Error number
Controller ready status
MID 0065 revision 004
Comments
Only contains empty spaces.
The value consists of 25 ASCII characters.
ID
Value range
Presetting
Example:
ID code part 4
Value
MID
0005
0004
001
MID 0071 revision 001
Comments
The error number consists of four ASCII characters.
ID
Value range
Presetting
Example:
Error number
Value
Always NOK (=0), as no differentiation is made between controller and
tool.
The value consists of one ASCII character.
ID
Fixed value
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10
33
-
Error no. Comment
–
11 Activation of system errors already available
01
0000 – 9999
-
105
0105
02
0
3 608 870 A47
Bytes
2
25
294
Bytes
2
4
2
1