1. Manuals
  2. Brands
  3. ICP DAS USA Manuals
  4. Transmitter
  5. WLS-T01
  6. Quick start manual

ICP DAS USA WLS-T01 Quick Start Manual

Hide thumbs

Advertisement

Table of Contents

1
What's in the Shipping Package?
The shipping package contains the following items:
WLS-T01
module
If any of these items are missing or damaged, please contact your local
distributor for more information. Save the shipping materials and cartons in
case you need to ship the module in the future.
Copyright © 2016 by ICP DAS Co., Ltd. All Rights Reserved.
WLS-T01
CR-123A 3.0v
Lithium battery
(4SI11G0000009)
Page 1
Version 1.0.0
Quick Start
Quick Start

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WLS-T01 and is the answer not in the manual?

Questions and answers

Related Manuals for ICP DAS USA WLS-T01

Summary of Contents for ICP DAS USA WLS-T01

  • Page 1 Version 1.0.0 WLS-T01 Quick Start What’s in the Shipping Package? The shipping package contains the following items: CR-123A 3.0v WLS-T01 Lithium battery Quick Start module (4SI11G0000009) If any of these items are missing or damaged, please contact your local distributor for more information. Save the shipping materials and cartons in case you need to ship the module in the future.
  • Page 2 Fig 1. Battery installation 2. Pressing the up (▲) or down (▼) button to wake up the WLS-T01, as shown in Figure 2, and confirm that the green LED is blink。If the green LED is blink, it means the module is running; if the green LED is not blink, it means the module is not running.
  • Page 3 Version 1.0.0 Mode, Button function and LED description WLS-T01 has two built-in modes, "Running mode" and "Setting mode". The functions of these two modes are described as follows: 1. Running mode: This mode is used to transmit location package every 3 seconds in the background. In this mode, the user can press the button to send an alarm package or enter the setting mode.
  • Page 4 Version 1.0.0 Table 1. Running mode description Running mode (default) Item Button LED status Description ● Green LED blink once, and Pressing the button then red LED steady lit 1 for 0.6 second will second after 0.6 second. transmit Help package.
  • Page 5 Version 1.0.0 Table 2. Setting mode description Setting mode Item Button LED status Description ●：change to Red LED blink every 0.2 Automatically item 2 second. transmit Node ID of module. ▲：none ▼：none ●：change to A Red LED blink every Setting wireless item 3 0.5 second.
  • Page 6 Version 1.0.0 ●：change to A Red LED blink every 1 Setting wireless item 1 second. RF channel, the minimum value ▲：+1 B When +1 or -1, green to maximum LED blink. If the value ▼：-1 value is 0 to F, is equal to maximum 16 segments.
  • Page 7 Startup to use Wireless Location System (WLS) includes the modules that RFU-400, WLS-T01, WLS-R01 and WLS software, as show in figure 4. The user need to check the wireless setting of each module as below. If the user need more detail about parameters of wireless setting, please refer to the user manual of each module.
  • Page 8 Version 1.0.0 2. WLS-T01： It is not required to adjust the wireless setting of WLS-T01. The default value about RF channel is 4, RF power is F, Node ID is the last two bytes of build-in IEEE address. If the user adjust WLS-R01 2.4GHz RF channel to 4, the WLS-R01 will can receive the wireless package.

Table of Contents