Advertisement
Quick Links
Outdoor Sling Bar
with Canopy
Steel Frame with Powder Coating
Assembly Instructions
Made in China
The owner's manual contains important safety information as well as assembly, use and
maintenance instructions. Keep the packaging and bags away from children and dispose
of all packaging properly before use.
Keep this manual for future reference.
Advertisement
Related Manuals for TDC USA 21881
Summary of Contents for TDC USA 21881
- Page 1 Outdoor Sling Bar with Canopy Steel Frame with Powder Coating Assembly Instructions Made in China The owner’s manual contains important safety information as well as assembly, use and maintenance instructions. Keep the packaging and bags away from children and dispose of all packaging properly before use.
- Page 2 Please contact us at our Toll Free customer service number 1-800-599-8898 for any assistance and replacement parts. Thank You. Dist. by TDC USA, Inc. Fairfield, NJ 07004 ©2022 All Rights Reserved. Made in China Item 21881 www.tdcusainc.com...
- Page 3 Warnings WARNING! • Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product construction. • Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be. •...
- Page 4 Parts A (x4) B (x2) C (x2) Pole Crossbeam Rack D (x4) E (x2) F (x2) Two Tier Ribs Beam Panel G (x1) H (x1) I (x1) Panel Panel Panel J (x4) K (x2) L (x2) Panel Shelves Shelves M (x2) N (x1) O (x1) Shelves...
- Page 5 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 1 Fig. 2 Step 1: Insert one M6x28 Bolt (Y) through either end of Panel Brace (U), and into the bolt- threading found in the middle of Panel (F), see Fig 1. Follow this step to secure a second Panel Brace (U) to the bottom of Panel (F).
- Page 6 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 4 Fig. 5 Step 3: Insert one M6x28 Bolt (Y) through either end of Panel Brace (T), and into the bolt- threading found in the middle of Panel (H), see Fig. 4. Follow this step to secure a second Panel Brace (T) to the bottom of Panel (H).
- Page 7 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 7 Step 5: Insert Two Tier Ribs (D) into openings of Connector (Q) until they are locked in place, see Fig 7. Place assembled ribs with connector over the height of assembled frame. Place longer ribs of Two Tier Ribs (D) in between Rib Braces (R).
- Page 8 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 8 Step 6: Insert two M6x28 Bolts (Y) through eyelets on opposite side of Panel (F), and into Pole (A), see Fig. 8. Follow this step to connect opposite end of second F to adjacent A.
- Page 9 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 9 Step 7: Insert two M6x28 Bolts (Y) through eyelets on the side of assembled Panels (J) and into Pole (A), see Fig. 9. Follow this step to connect opposite end of J’s to adjacent A. Follow these steps to assemble second set of J’s with A’s on opposite side of frame.
- Page 10 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 10 Step 8: Insert two M6x28 Bolts (Y) through eyelets on the side of Panel (H) and into Pole (A), see Fig. 10. Follow this step to assemble Panel (I) with adjacent A.
- Page 11 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 11 & Step 9: Fig. 12 Insert pins at either end of Shelves (L) into the eyelets found in the center of Panel Braces (U) [connected to Panel (F)], and into the eyelets found in the center of Panel Braces (T) [connected to Panel (I)], see Fig.
- Page 12 Assembly Instructions *Do not tighten bolts down completely during this portion of assembly.* Fig. 13 Step 10: Place Beam (E) over assembled Panels (J). Insert two M6x15 Bolts (X) through middle eyelets of Corner Brace (S), and into bolt-threading found on two sides of Pole (A), see Fig.
- Page 13 Assembly Instructions Do not put glass onto bar and counters until this step is completed Fig. 14 Fig. 15 Step 11: Remove glass from Counter (O), Counter (N), and from Bar (P), and carefully set those aside. Place Counter (O) rim over assembled Panels (J) and Panel (H). Insert M6x15 Bolts (X) through remaining eyelet of Corner Brace (S), and into bolt-threading at the end of Counter (O), see Fig.
- Page 14 Assembly Instructions Step 12: Carefully put glass back in place for Bar (P) and Counters (N&O). Place the larger Canopy (W) over lower ribs of Two Tier Ribs (D). Unfold the larger Canopy (W) completely so that pockets underneath canopy fit into rib ends. Run two Stakes (V) through designated eyelets at bottom of Poles (A), and into the ground for extra stability.
- Page 15 This allows us to provide support in the event of possible operator errors. All furniture manufactured and sold by TDC USA, Inc. is warranted to the original purchaser against defects in workmanship and materials. If a product manufactured by TDC fails during the first year from date of purchase under the terms of our limited warranty, TDC will replace the item at no charge.
-
Page 16: Customer Service
Changes in wood color due to the natural aging of the wood A sales receipt must be provided to validate 1-Year Limited Warranty. Customer Service: Monday - Friday • 9:00 am - 5:00 pm Phone: 800-599-8898 Email: support@tdcusainc.com TDC USA, Inc. 5 Industrial Rd, STE 1 Fairfield, NJ 07004-3017... - Page 17 Outdoor Sling Bar with Canopy Steel Frame with Powder Coating Dist. by TDC USA, Inc. Fairfield, NJ 07004 ©2022 All Rights Reserved. Made in China. Item #21881 Questions and Comments 1-800-599-8898 (9 am - 5 pm EST) www.tdcusainc.com...
Need help?
Do you have a question about the 21881 and is the answer not in the manual?
Questions and answers