TDC USA 21944 Instructions Manual

7 piece patio dining set

7 Piece

Patio Dining Set

Steel Frame with Powder Coating

Table Assembly

InstructIons

Parts

Assembly

Warranty

Customer Service

1-800-599-8898

4-7

8-9

Table of Contents

Need help?

Do you have a question about the 21944 and is the answer not in the manual?

Page 1 7 Piece Patio Dining Set Steel Frame with Powder Coating Table Assembly InstructIons Parts Assembly Warranty Customer Service 1-800-599-8898...
Page 2 After final alignment, make sure all bolts and nuts are securely tightened with screw covers Table Ring pressed in place. Hex Key Do not tighten the screws until all screws are in place. Item #21944 Item #21944 Customer Service 1-800-599-8898 Customer Service 1-800-599-8898...
Page 3 Arch (C) {see fig. 1} and into the center of rim of Table (A). Follow this step to (D). Tighten all screws that have been left loose throughout the building process. mount the additional Arch (C) on the opposite side of the table rim. Item #21944 Item #21944 Customer Service...
Page 4 Bring the two pieces together at the center of the table where a hole is cutout in the glass. Screw the two pieces back together and tighten by turning the lower-half clockwise. Place the center cap back when an umbrella isn’t being used. Item #21944 Item #21944 Customer Service...
Page 5 • Wind damage • Failure caused by unreasonable, unanticipated or abusive use All furniture manufactured and sold by TDC USA, Inc. is warranted to the original • Failure caused by a lack of reasonable and necessary care and maintenance purchaser against defects in workmanship and materials. If a product manufactured by •...