LG LSIS3018SS Owner's Manual page 61

Symptoms
• Oven controls not properly set.
The oven does not
clean after a Self
• Oven was heavily soiled.
Clean cycle
• The Self Clean cycle has been selected, but the door is not closed.
CLEAN and door flash
in the display
• The oven door is locked because the temperature inside the oven has not
LOCKED is on in the
display when you
want to cook
• This is normal in a new oven and will disappear in time.
Burning or oily odor
emitting from the vent
• The shiny, silver-colored racks were cleaned in a Self Clean cycle.
Oven racks are
difficult to slide
Moisture collects on
• This is normal when cooking foods high in moisture.
oven window or steam
• Excessive moisture was used when cleaning the window.
comes from oven vent
• If the appliance is having trouble connecting to the Wi-Fi network, it may be too
• The Wi-Fi connection may not connect or may be interrupted because of the
Wifi network does not
connect properly.
• The network connection may not work properly depending on the internet service
• The surrounding wireless environment can make the wireless network service
Surface elements
• The element will cycle on and off to maintain level of power it has been set at.
frequently cycle on
and off.
• The password for the Wi-Fi network was entered incorrectly.
• Mobile data for your smartphone is turned on.
• The wireless network name (SSID) is set incorrectly.
Trouble connecting
appliance and
• The router frequency is not 2.4 GHz.
smartphone to Wi-Fi
network
• The distance between the appliance and the router is too far.
Possible Causes / Solutions
- See the Self Clean section.
- Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens
may need to Self Clean again or for a longer period of time.
- Close the oven door.
dropped below the locking temperature.
- Turn the oven mode knob to the Off position. Allow the oven to cool.
- To speed the process, set a Self Clean cycle for a minimum of 3 hours. See
the Self Clean section.
- Apply a small amount of vegetable oil to a paper towel and wipe the edges of
the oven racks with the paper towel.
far from the router. Purchase a Wi-Fi repeater (range extender) to improve the
Wi-Fi signal strength.
home network environment.
provider.
run slowly.
This is normal operation and not a system failure.
- Delete your home Wi-Fi network and begin the registration process again.
- Turn off the Mobile data on your smartphone before registering the appliance.
- The wireless network name (SSID) should be a combination of English letters
and numbers. (Do not use special characters.)
- Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4
GHz and connect the appliance to the wireless router. To check the router
frequency, check with your Internet service provider or the router manufacturer.
- If the appliance is too far from the router, the signal may be weak and the
connection may not be configured correctly. Move the router closer to the
appliance or purchase and install a Wi-Fi repeater.
TROUBLESHOOTING 61