LG CineBeam PF610P-SA Owner's Manual page 97

52
• [White Balance]
Adjusts the overall color temperature of the screen as desired.
– [Method]: This method is used for fine-tuning the color temperature setting.
You can control the color temperature at two points of the bright part and
dark part of the video if you select [2 Points], at each point of 10 levels if you
select [10 Points IRE], and at each point of 22 levels of the video if you select
[22 Points IRE].
– [Point]: Select screen brightness for color temperature adjustment.
If [Method] is set to [2 Points]; use Low to select shadows and High to select
highlights.
– [IRE]: Select screen brightness for color temperature adjustment.
When the [Method] is set to [10 Points IRE], you can select the brightness
with the 10 levels of brightness.
When the [Method] is set to [22 Points IRE], you can select the brightness
with the 22 levels of brightness.
– [Target Luminance]/[Adjusting Luminance]: You can adjust the selected
brightness by points.
• You can do these settings only when the [Picture Mode] is the [Expert
(Bright Room)] or the [Expert (Dark Room)] and when the [Method] is set
to [10 Points IRE] or [22 Points IRE].
– [Red]/[Green]/[Blue]: Adjust the color temperature of the selected point.
Adjust the intensity of [Red]/[Green]/[Blue] in the range of -50 to 50.
You can adjust respective values for the brightness selected in [Point].
• [Color Management System]
This is used when experts control it by using a test pattern. You can control it by
selecting areas of six colors ([Red]/[Green]/[Blue]/[Cyan]/[Magenta]/[Yellow]).
For normal images, adjustments may not result in noticeable Color changes.
– [Color]: From [Red]/[Green]/[Blue]/[Cyan]/[Magenta]/[Yellow], select a tone
to adjust.
– [Saturation]/[Tint]/[Luminance]: Adjust the chroma/tint/luminance of the
tone in the range of -30 to +30.