LG CineBeam PF610P-SA Owner's Manual page 110

[Network Connection Settings]
(Q. Settings)
If you configure settings for the network, you can use various services such as online
contents and applications.
[Wired Connection (Ethernet)]
Select [Wired Connection (Ethernet)].
If the router connected to the network supports the DHCP feature, connecting the
projector and router by wire will automatically connects to the network.
If the automatic setup is not supported, you can select [Edit] to manually set up the
network connection.
• The IPv6 setup does not support [Edit].
[Wi-Fi Connection]
Select [Wi-Fi Connection].
If you have set up the projector for a wireless network, you can check and connect to
the available wireless Internet networks.
• [Add a Hidden Wireless Network]
If you input the name of network directly, you can add a wireless network.
• [Connect via WPS PBC]
If the wireless router you want to connect to has a Wi-Fi Protected Setup-Push
Button Configuration (WPS-PBC) feature, you can easily connect to the wireless
router by pressing the WPS-PBC button on the router. Press the wireless
router's WPS-PBC button and then press the projector's [Connect] button.
•
[Connect via WPS PIN]
This is a method to connect to an access point using a Wi-Fi Protected Setup-
Personal Identification Number (WPS-PIN). Select the access point (AP) to
which you would like to connect. Enter the PIN displayed on the access point's
Wi-Fi device.
• [Advanced Wi-Fi Settings]
Once you connect to a wireless network you can view connection information
such as detailed IP address information. In addition, you can change the IP
address and DNS server address you want to connect to by pressing the [Edit]
button.
– The IPv6 setup does not support [Edit].
[Connection] [Network Connection Settings]
65