Page 2
Congratulations! You are about to install and use a device from the Stromtank range. You have chosen a high-tech device that will play a central role to hear the excellent quality of your audio components. Stromtank has been...
Storage ..................Specifictions ................The weight of Stromtank can be up to 300 Ibs / 135 kg depending upon the model. Use an appropriate lifting method as well as help from a third party Quality and Warranty............... when installing the equipment.
Use an appropriate lifting method as well as help from a third party when installing the equipment. While the Stromtank is still in its case, please move it to a location near the place where it will be installed. Remove all jewelry including watches, rings and belts from your per- son to avoid damage to the exterior of the Stromtank during removal and installation.
Before you start with the installation take care that no audio parts are connected with the Stromtank and the unit is not connected with the electric circuit. To install the Stromtank and connect it with your audio equipment please follow the steps in order.
Before it will be switch off there will be an acoustic alarm signal for approx. 1 minute. If the red LED on the top is lighting check if Stromtank is connected by AC-in power cord to the electric circuit. When the red LED on the top disappears the charging mode started (front meter shows charge current).
Do not rub or polish the finish and do not allow objects to come in contact with it. To clean the Stromtank first unplug the unit from the electric circuit. To wipe off fin- gerprints and other grease spots spray a small amount of mild detergent dissolved in water onto the supplied microfiber cloth and gently wipe the surface with the cloth.
AC output fuse thermal-magnetic circuit breaker AC input connection ICE 320 - C14 (fuse 10AT / 16 AT*) Interface converter, BMS*, emergency charger* * only for use with Stromtank software and charger Design and specifications are subject to change without notice.
Stromtank are carried out in their entirety by its factory in Germany. tenance. The use of a Stromtank is the responsibility of the customer in all cases.
Need help?
Do you have a question about the S-5000 High-power and is the answer not in the manual?
Questions and answers