Advertisement

Quick Links

Skylab M&C Technology Co., Ltd.
SKW75 User Manual

General Description

The module SKW75 compliant to 802.11 b/g/n Wi-Fi Solution for low power,
low-cost, and highly integrated AP and consumer electronic devices, the module
requiring only a external 3.3V power supply .
The module based on the single chip MT7620N which integrates an 802.11n
MAC/BB/radio with internal PA and LNA. It supports 802.11n operations up to 144
Mbps for 20 MHz and 300 Mbps for 40 MHz channel respectively, and IEEE
802.11b/g data rates.
The module support AP mode and client mode and router mode.

Applications

AP WIFI
3G/4G wifi router
Repeater WIFI
IP TV
IP DVD(Internet VOD Player)
Set Top Box
Home Gateways
Gaming Consoles
DVR

Features

Compliant to IEEE 802.11b/g/n WLANs
2T2R Mode with support for a 300Mbps TX/RX PHY rate.
DDR2 memory up to 512Mb
Flash memory up to 64Mb
4LAN ports and 1WAN port
Support USB 2.0 host device
Support USB disk.
Support AP/Client/Router mode
1
SKW75-User Manual
SKW75-UM-001,A/1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKW75 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Skylab SKW75

  • Page 1 SKW75-User Manual SKW75 User Manual General Description The module SKW75 compliant to 802.11 b/g/n Wi-Fi Solution for low power, low-cost, and highly integrated AP and consumer electronic devices, the module requiring only a external 3.3V power supply . The module based on the single chip MT7620N which integrates an 802.11n MAC/BB/radio with internal PA and LNA.
  • Page 2  Security: WEP 64/128, WPA, WPA2, TKIP, AES, WAPI  RoHS compliance meets environment-friendly requirement.  55(L) x 23(W) x 4.80(H) mm small dimension Module Pinout Figure 1: SKW75 Pin Name Pin Description PORT1_RX+ Ethernet port PORT1_TX+ Ethernet port PORT1_RX-...
  • Page 3 Skylab M&C Technology Co., Ltd. SKW75-User Manual No Connect PORT2_RX- Ethernet port No Connect PORT2_TX+ Ethernet port LINK2 Port #2 activity LED PORT2_TX- Ethernet port LINK3 Port #3 activity LED PORT 3_TX+ Ethernet port LINK4 Port #4 activity LED PORT 3_TX-...
  • Page 4 Skylab M&C Technology Co., Ltd. SKW75-User Manual GPIO0 GPO0(output only) No Connect RESET Resets the firmware to its default configuration, it has a internal Ground WPS_PBC WPS Input Pin No Connect Ground No Connect 3.3V input 600mA, recommended voltage 3.3V,Min2.97V, VDD_3.3V...
  • Page 5 Skylab M&C Technology Co., Ltd. SKW75-User Manual SKW75-UM-001,A/1...
  • Page 6 Skylab M&C Technology Co., Ltd. SKW75-User Manual SKW75-UM-001,A/1...
  • Page 7 Skylab M&C Technology Co., Ltd. SKW75-User Manual Figure 3: SKW75 Reference design schematic SKW75-UM-001,A/1...
  • Page 8 This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:2ACOE-SKW75 Or Contains FCC ID:2ACOE-SKW75” when the module is installed inside another device, the user manual of this device must contain below warning statements;...

Table of Contents