Table of Contents
Advertisement
Quick Links
Skylab M&C Technology Co., Ltd.
WG203-User Manual
WG203 User Manual
General Description
WG203 is a highly integrated for 2.4/5G IEEE 802.11n 2x2 MIMO WLAN for CE
application, It implements half-duplex OFDM, CCK, and DSSS baseband processing, supporting
130Mbps for 20MHz and 300Mbps for 40MHz channel and IEEE 802.11b/g data rates. It
supports two transmit traffic stream and two receive traffic stream using two Tx chain and two
receive chain for high throughput and range performance.
Applications
IP Camera
IP TV
IP DVD(Internet VOD Player)
Set Top Box
Home Gateways
Gaming Consoles
DVR
Figure 1: WG203 Top View
Features
2.4/5G GHz Compliant to IEEE 802.11b/g/n 2x2 WLANs
Supports USB 2.0 interface
WG203-UM-001,A/1
1
Advertisement
Table of Contents
Related Manuals for Skylab WG203
Summary of Contents for Skylab WG203
- Page 1 WG203 User Manual General Description WG203 is a highly integrated for 2.4/5G IEEE 802.11n 2x2 MIMO WLAN for CE application, It implements half-duplex OFDM, CCK, and DSSS baseband processing, supporting 130Mbps for 20MHz and 300Mbps for 40MHz channel and IEEE 802.11b/g data rates. It supports two transmit traffic stream and two receive traffic stream using two Tx chain and two receive chain for high throughput and range performance.
- Page 2 Data rates of up to 54 Mbps for 802.11g and 144.4 for 802.11n HT20, 300 Mbps for HT40. RoHS compliance meets environment-friendly requirement. 29(L) x 17(W) x 2.80(H) mm small dimension Applications Block Diagram Figure 2: WG203 Block Diagram Ordering Information Module NO. RF Connector Type...
- Page 3 Skylab M&C Technology Co., Ltd. WG203-User Manual Module Pinout Figure 3: WG203 Pin Package Pin Description Pin No. Pin name Description Remark 1.5V Module Power Supply Ground 3.3V Module Power Supply USB_D- USB Interface DM USB_D+ USB Interface DP Ground...
- Page 4 Skylab M&C Technology Co., Ltd. WG203-User Manual Ground PCB Footprint and Dimensions Figure 4: WG203 Footprint Manufacturing Process Recommendations WG203-UM-001,A/1...
- Page 5 Skylab M&C Technology Co., Ltd. WG203-User Manual Figure 5: WG203 Typical Leadfree Soldering Profile Note： The final soldering temperature chosen at the factory depends on additional external factors like choice of soldering paste，size，thickness and properties of the baseboard，etc. Exceeding the maximum soldering temperature in the recommended soldering profile may permanently damage the module.
- Page 6 This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:2ACOE-WG203 Or Contains FCC ID:2ACOE-WG203” when the module is installed inside another device, the user manual of this device must contain below warning statements;...
- Page 7 WG203-User Manual Skylab M&C Technology Co., Ltd. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the WG203 and is the answer not in the manual?
Questions and answers