Pioneer DEH-15UB/XNUC Service Manual

Pioneer DEH-15UB/XNUC Service Manual

Cd rds receiver

Advertisement

CD RDS RECEIVER
DEH-15UB
DEH-1500UB
DEH-1500UBA
DEH-1500UBB
DEH-1500UBG
DEH-1550UB
DEH-1590UB
This service manual should be used together with the following manual(s):
Model No.
Order No.
CRT4759
CX-3287
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2012
Mech. Module
S11.6STD
CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
DEH-15UB/XNUC
/XNEW5
/XNEW5
/XNEW5
/XNEW5
/XNES
/XNID
Remarks
ORDER NO.
CRT5053
/XNUC
K-ZZZ JULY 2012 Printed in Japan

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer DEH-15UB/XNUC

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936...
  • Page 2: Safety Information

    The AEL (accessible emission level )of the laser power output is less than CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for CLASS 1. A specially instructed person should do servicing operation of the apparatus. DEH-15UB/XNUC...
  • Page 3 CAUTION Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Discord used batteries according to the manufacturer's instructions. DEH-15UB/XNUC...
  • Page 4: Table Of Contents

    10.2 KEYBOARD UNIT..........................48 10.3 CD CORE UNIT (S11.6STD) ......................... 50 10.4 WAVEFORMS ............................52 11. PCB CONNECTION DIAGRAM........................54 11.1 TUNER AMP UNIT..........................54 11.2 KEYBOARD UNIT ..........................58 11.3 CD CORE UNIT (S11.6STD)........................60 12. ELECTRICAL PARTS LIST .......................... 62 DEH-15UB/XNUC...
  • Page 5: Service Precautions

    (shorting-solder) by referring to "the DISASSEMBLY". 4. After replacing the pickup unit, be sure to check the grating. 5. Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic induction. DEH-15UB/XNUC...
  • Page 6: Notes On Soldering

    Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden). The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia. DEH-15UB/XNUC...
  • Page 7: Specifications

    2. SPECIFICATIONS 2.1 SPECIFICATIONS DEH-15UB/XNUC Signal-to-noise ratio ..94 dB (1 kHz) (IHF-A network) General Number of channels ..2 (stereo) Power source ....14.4 V DC (10.8 V to 15.1 V al- MP3 decoding format ..MPEG-1 & 2 Audio Layer 3 lowable) WMA decoding format ..
  • Page 8 Gain ......+6 dB to –24 dB Note Phase ..... Normal/Reverse Specifications and the design are subject to modifications without notice. CD player System ......Compact disc audio system Usable discs ....Compact disc Signal-to-noise ratio ..94 dB (1 kHz) (IEC-A network) DEH-15UB/XNUC...
  • Page 9: Disc/Content Format

    MP3 decoding format ..MPEG-1 & 2 Audio Layer 3 Specifications and the design are subject to WMA decoding format ..Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch modifications without notice. audio) (Windows Media Player) 2.2 DISC/CONTENT FORMAT DEH-15UB/XNUC...
  • Page 10: Basic Items For Service

    Unit Number : QWM3467(C) Keyboard Unit Unit Number : QWM3466(E) Unit Number : QWM3469(F) Unit Number : QWM3471(H) Unit Name : Tuner Amp Unit A:DEH-15UB/XNUC Unit Number : (A,F,H) B:DEH-1500UB/XNEW5 Unit Number : (B) C:DEH-1500UBA/XNEW5 Unit Number : (C) D:DEH-1500UBB/XNEW5...
  • Page 11: Jigs List

    CD Mechanism Module 3.4 CLEANING Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned Cleaning tools CD pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 DEH-15UB/XNUC...
  • Page 12: Block Diagram

    IC601 (2/2) Q875 R5S726A0D216FP RGBDT/DIMMER FLASH ROM ANTP IC681 USB5V REGULATOR IC551 :PEB047A8 BD9876EFJ :PEB046A8 B.UP IC552 SYNC SYNC BD2232G-G :DEH-15UB/XNUC Q601 ASEN :DEH-1500UB/XNEW5 VOUT USB5V DDON :DEH-1500UBA/XNEW5 :DEH-1500UBB/XNEW5 :DEH-1500UBG/XNEW5 USBCTL :DEH-1550UB/XNES USBFLG :DEH-1590UB/XNID SSEN REGULATOR IC IC911 PICKUP UNIT BA49183-V12 CD CORE UNIT(S11.6 STD)
  • Page 13 IC1801 DPDT DPDT PD6583A8 DSENS DSENS DSENS V1801 VDSENS REMOTE CONTROL SENSOR IC1941 GP1UXC14RK ILM+B VDCONT ILM+B D1952,D1953, D1967,D1968, D1954,D1955, D1969,D1970, D1956,D1957, D1971,D1972, D1951 D1958,D1959, D1973,D1974, D1960,D1961, D1975,D1976, CDRST D1962,D1963, D1977,D1978, D1964,D1965 D1979,D1980 D1966 D1981 CN1911 USB5V USB5V USB5V DEH-15UB/XNUC...
  • Page 14: Diagnosis

    In case of the above signal, the communication Source keys with Grille microcomputer may fail. operative If the time interval is not 300 msec, the oscillator may be defective. Source ON SYSPW <- H Pin 8 Completes power-on operation. (After that, proceed to each source operation) DEH-15UB/XNUC...
  • Page 15: Error Code List

    : Servo-related errors CD Off, Eject, ACC Off, Back-up Off, Communication reset, Reset Load NG/Eject NG(50) : Reload, Eject, ACC Off, Back-up Off, Communication reset, Reset Failure in retried turning for ejection : CD On, Eject, ACC Off, Back-up Off, Communication reset, Reset DEH-15UB/XNUC...
  • Page 16 USB storage de- USB storage de- vice consumes vice and do not more than maxi- use it. Turn the mum allowable ignition switch to current. OFF, then to ACC or ON and then connect only compliant USB storage devices. DEH-15UB/XNUC...
  • Page 17: Connector Function Description

    5.3 CONNECTOR FUNCTION DESCRIPTION DEH-15UB/XNUC, DEH-1500UBA/XNEW5, DEH-1500UB/XNEW5, DEH-1500UBB/XNEW5, DEH-1500UBG/XNEW5, DEH-1550UB/XNES ANTENNA REAR OUTPUT 15 13 11 9 7 5 3 1 WIRED REMOTE CONTROL 16 14 12 10 8 6 4 2 (Except DEH-15UB/XNUC, DEH-1500UBA/XNEW5) 1 FL+ 9 NC 10 NC...
  • Page 18: Service Mode

    Conf. LCD pattern 1 ILM(2) BAND Draw 3 (* And change ILM color) (If not have, ILM(1) light on) ROTARY center Conf. LCD pattern 2 Draw 4 ILM(1) Drawings Style Draw1 ALL light up Draw2 ALL light off Draw3 Draw4 DEH-15UB/XNUC...
  • Page 19: Display Test Mode 2

    The screen gets still when entering this item. On (an initial value or On (state when setting value of default entering test mode) Switching to next display menu) by pressing “ 1 ” + “ 3 ” buttons together. DEH-15UB/XNUC...
  • Page 20: Software Version Up Method

    The display is continued until the power supply is turned OFF. If the power supply is turned ON again, the display is not changed. The upgrading using USB is disabled, so it is necessary to write programs in serial Flash using E10A. DEH-15UB/XNUC...
  • Page 21: Cd Test Mode

    When the power is turned on/off the gain of the RFAMP is reset to 0 dB. At the same time all the self-adjusting values shall return to the default setting. Do not do Tracking Servo Close before doing Focus Servo Close. (Because the overcurrent flows) DEH-15UB/XNUC...
  • Page 22: Disassembly

    Slide the Tuner Amp Assy in the direction of the arrow. Lift off the Tuner Amp Assy from the Heat Sink side. The Tuner Amp Assy is fixed into the ditch. Disconnect the FFC and then remove the CD Mechanism Module. CD Mechanism Module Fig.2 DEH-15UB/XNUC...
  • Page 23 Tuner Amp Unit Remove the two screws. Remove the two screws and then remove the Tuner Amp Unit. Fig.3 - Attention of removing (Fig.4) Don’t remove this screws excluding the dismantlement of the CD Mechanism Module. CD Mechanism Module Fig.4 DEH-15UB/XNUC...
  • Page 24 1. Attach the button from the front side of the panel. Fig.7 2. Attach the spring to the arm as shown in the figure. The bended tip of the spring is set to this side. Hitch the spring to the groove. Fig.8 DEH-15UB/XNUC...
  • Page 25 4. Fit the boss on the lower side of the arm in the lower hole of the panel, and then warp the rib on the panel in the direction shown in the figure and fit the boss of the arm in the panel. Fig.9 DEH-15UB/XNUC...
  • Page 26 2. Be careful not to hold the solid line portions or the CRG mecha part or insert foreign substances, to prevent distortion. 3. When holding the sides of the upper chassis, do not apply excessive force to prevent distortion. (Approx. 8N or less) Handling OK Handling NG DEH-15UB/XNUC...
  • Page 27 Fig 3 Fig 4 [Incorrect built-in state] The chassis is not nipped between Outer holder Normal built-in state the PU case and the PU rack. Rear end of feeding screw DEH-15UB/XNUC...
  • Page 28: Each Setting And Adjustment

    1k ohms in series. The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it. DEH-15UB/XNUC...
  • Page 29: Checking The Grating After Changing The Pickup Unit

    Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. Hint Reloading the disc changes the clamp position and may decrease the "wobble". DEH-15UB/XNUC...
  • Page 30 Grating waveform Ech -> Xch 20 mV/div, AC Fch -> Ych 20 mV/div, AC 0 degrees 30 degrees 45 degrees 60 degrees 75 degrees 90 degrees DEH-15UB/XNUC...
  • Page 31: Pcl Output Confirmation

    Therefore, when replacing, be sure to use parts of identical designation. Screw adjacent to mark on the product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.) DEH-15UB/XNUC...
  • Page 32: Packing

    1590UB/XNID 15UB/XNUC 1500UB/XNEW5 1500UBA/XNEW5 1500UBB/XNEW5 1500UBG/XNEW5 1550UB/XNES 1590UB/XNID 1500UB/XNEW5 1500UBA/XNEW5 1500UBB/XNEW5 1500UBG/XNEW5 1550UB/XNES 1590UB/XNID 1500UB/XNEW5 1500UBA/XNEW5 1500UBB/XNEW5 1500UBG/XNEW5 15UB/XNUC 1550UB/XNES 1500UB/XNEW5 1590UB/XNID 1500UBA/XNEW5 1500UBB/XNEW5 1500UBG/XNEW5 15UB/XNUC 1550UB/XNES 1590UB/XNID 15UB/XNUC 1500UB/XNEW5 1500UBA/XNEW5 15UB/XNUC 1500UBB/XNEW5 1500UBG/XNEW5 15UB/XNUC 1550UB/XNES 1550UB/XNES 1590UB/XNID 1590UB/XNID DEH-15UB/XNUC...
  • Page 33 Screw See Contrast table (2) 15-3 Service Network See Contrast table (2) Handle QNC3021 (2) CONTRAST TABLE DEH-15UB/XNUC, DEH-1500UB/XNEW5, DEH-1500UBA/XNEW5, DEH-1500UBB/XNEW5, DEH-1500UBG/ XNEW5, DEH-1550UB/XNES and DEH-1590UB/XNID are constructed the same except for the following: DEH-15UB/ DEH-1500UB/ DEH-1500UBA/ DEH-1500UBB/ DEH-1500UBG/ Mark...
  • Page 34 Owner's Manual,Installation Manual Part No. Language QRD3130 English, French, Italian, Spanish(Espanol), German, Dutch, Russian QRD3131 English, French, Spanish(Espanol) QRD3132 English, Spanish(Espanol), Portuguese(B), Traditional Chinese, Arabic, Persian QRB3250 English DEH-15UB/XNUC...
  • Page 35 DEH-15UB/XNUC...
  • Page 36: Exterior

    9.2 EXTERIOR 15UB/XNUC 1550UB/XNES 1590UB/XNID 1500UBB/XNEW5 1590UB/XNID 15UB/XNUC 15UB/XNUC 1550UB/XNES 1590UB/XNID 1500UB/XNEW5 1500UBA/XNEW5 1500UBB/XNEW5 1500UBG/XNEW5 DEH-15UB/XNUC...
  • Page 37 See Contrast table (2) Door QAT3006 Knob Unit QXA3670 Spring YBL5010 Card Remote Control Unit See Contrast table (2) Cover See Contrast table (2) Sheet See Contrast table (2) Seal See Contrast table (2) Label See Contrast table (2) DEH-15UB/XNUC...
  • Page 38 (2) CONTRAST TABLE DEH-15UB/XNUC, DEH-1500UB/XNEW5, DEH-1500UBA/XNEW5, DEH-1500UBB/XNEW5, DEH-1500UBG/ XNEW5, DEH-1550UB/XNES and DEH-1590UB/XNID are constructed the same except for the following: DEH-15UB/ DEH-1500UB/ DEH-1500UBA/ DEH-1500UBB/ DEH-1500UBG/ Mark Description XNUC XNEW5 XNEW5 XNEW5 XNEW5 Cord Assy CDP1480 QDP3012 QDP3014 QDP3012 QDP3012 Tuner Amp Unit...
  • Page 39 DEH-15UB/XNUC...
  • Page 40: Cd Mechanism Module

    9.3 CD MECHANISM MODULE (A) : GEM1024 (B) : GEM1043 DEH-15UB/XNUC...
  • Page 41 CNV8342 Guide CNW2240 Roller CNW1172 Holder CNW1195 CNW2241 Roller CNW1175 ..CNW1177 CNW1178 Gear CNW1180 Gear CNW1181 ..Gear CNW1183 Rack CNW1184 Gear CNW1185 Gear CNW1186 Gear CNW1187 Gear CNW2287 Clamper CNW1190 CNW1192 Holder CNW1193 Holder CNW1194 Damper CNW1197 DEH-15UB/XNUC...
  • Page 42: Schematic Diagram

    AUXL R803 SOURCE R806 R807 R804 AUXR NOTE : AUXGND Symbol indicates a resistor. RGBST/ILMCLR2 DEH-15UB/XNUC No differentiation is made between chip resistors and DEH-1500UB/XNEW5 discrete resistors. RGBCK/ILMCLR1 US5V DEH-1500UBA/XNEW5 USB5V Symbol indicates a capacitor. CN1931 DPDT No differentiation is made between chip capacitors and...
  • Page 43 R812 RGBCK/ILMCLR1 R961 R813 RGBDT/DIMMER 2.2k DIAG MASK C330 Dim off 12.13 V R814 2.2k Q875 KYDT Dim on 8.03 V TPD1052F DPDT LTC043EEB R816 2.2k ROT0 ILMPW B.REM&A.ANT R817 2.2k ROT1 SWVDD L851 IC801 DPDT OUTY TC7SET08FUS1 SWVDD DEH-15UB/XNUC...
  • Page 44 PREOUT DEH-15UB/XNUC...
  • Page 45 POWER SUPPLY DEH-15UB/XNUC...
  • Page 46 DEH-15UB/XNUC...
  • Page 47 DEH-15UB/XNUC...
  • Page 48: Keyboard Unit

    R1944 L1801 DGND DGND ILLUMINATION only A, F, H only B - E DGND V1801 except D only D V1801 CAW2024 CAW2027 SEGMENT LCD COLOR2 GREEN ILMGND only E D1952-D1966 : SML-D12P8W(KL) DEH-15UB/XNUC DEH-1500UB/XNEW5 DEH-1500UBA/XNEW5 DEH-1500UBB/XNEW5 DEH-1500UBG/XNEW5 DEH-1550UB/XNES DEH-1590UB/XNID DEH-15UB/XNUC...
  • Page 49 COLOR1 USB:±0.0 dBs USBGND RED/AMBER except E Q1951 A, B, D, F, H COLOR AMBER D1967 - D1981 SML-D12V8W(PQ) SML-D12D8W(RS) only E R1971 R1973 2.2k R1976 NEW5 ILMCLR R1978 1.8k R1980 1.8k except E R1982 2.2k ILMGND R1990 1.2k DEH-15UB/XNUC...
  • Page 50: Cd Core Unit (S11.6Std)

    C308 CSN1081-A R309 PRTLIM TKRNF DSCSNS 1u/10 MOTOR DRIVER LOGIC TABLE PRTF FCRNF (1608) PRTT LOAD PLAY TKCDET SWITCHES: PREVCC CLCONT FCCDET CD CORE UNIT (S11.6STD) LOEJ CONT S901:HOME SWITCH..ON-OFF S903:DSCSNS SWITCH..ON-OFF The underlined indicates the switch position. PGND DEH-15UB/XNUC...
  • Page 51 /CDSRQ /CDSRQ R706 /CDSTBY /CDSTBY R702 R708 SKIP SKIP R701 RESET 8 RESET 3.3V CN701 10 GND DATA 11 DATA BCLK 12 BCLK LRCK 13 LRCK 14 GND 15 PGND LOGIC TABLE /WAIT 16 WAIT PLAY IIC-BUS Digital PGND DEH-15UB/XNUC...
  • Page 52: Waveforms

    1 V/div fRFAGC 500 mV/div 500 mV/div 500 mV/div 9TIN 500 mV/div Focus Search waveform Track Open waveform 100 Track Jump waveform (32 Track Jump x 3) Ref.: Ref.: Ref.: REFO REFO REFO Mode: Mode: Mode: TEST TEST TEST DEH-15UB/XNUC...
  • Page 53 12 cm CD Eject operation 12 cm CD Eject operation Ref.: Ref.: Mode: Mode: Normal Normal 500 μs/div fRFAGC 1 V/div 9TIN 1 V/div 1 V/div aFIN 1 V/div μ Black Dot (800 m) during play Ref.: REFO Mode: Normal DEH-15UB/XNUC...
  • Page 54: Pcb Connection Diagram

    C305 C256 C321 C318 C251 C259 C310 SIDE B C317 R304 C252 C312 Chip Part P.C.Board R307 R302 R555 D551 C562 R311 C551 C556 C557 C563 C558 C555 C564 IC551 C553 R553 R552 R554 C552 C565 L551 D552 FRONT DEH-15UB/XNUC...
  • Page 55 CN701 R703 R877 C872 C852 IC552 R878 C561 C873 C802 L851 C851 C560 R801 C811 C559 R808 R851 L801 C805 C808 C803 C809 IC801 R804 R803 D802 D811 D803 R813 VA802 C804 C810 R818 CN801 CN1931 C806 C801 FRONT DEH-15UB/XNUC...
  • Page 56 TUNER AMP UNIT TESTIN DEH-15UB/XNUC...
  • Page 57 SIDE B DEH-15UB/XNUC...
  • Page 58: Keyboard Unit

    D1978 D1964 D1977 D1963 CN801 D1976 D1962 D1975 D1961 D1973 D1957 R1802 D1974 D1956 R1987 R1988 D1968 D1960 R1989 D1953 D1972 R1973 C1953 R1981 R1975 R1986 R1984 R1932 R1931 R1956 C1951 D1952 C1958 R1953 D1959 D1967 D1971 R1993 D1955 DEH-15UB/XNUC...
  • Page 59 DEH-15UB/XNUC...
  • Page 60: Cd Core Unit (S11.6Std)

    C235 CN101 MOTOR R246 R232 HOME C102 S901 C201 D101 CN702 R253 R245 C238 R706 C240 C710 C205 R297 C299 C707 C705 C220 R702 R701 SPINDLE MOTOR CN701 CN701 C702 C307 R710 C701 C308 C312 REFO1 IC301 C306 R309 DEH-15UB/XNUC...
  • Page 61 Q201 R240 R282 R293 C204 R283 R281 C284 C222 IC201 C281 C218 R292 C301 C282 R216 R218 C219 R229 R291 C217 C283 C216 C228 R217 C221 C215 C212 R709 R260 R708 S905 C708 R313 DSCSNS R312 R311 S903 R310 DEH-15UB/XNUC...
  • Page 62: Electrical Parts List

    The expression of the unit in this manual is shown by u instead of . Please do not make a mistake. Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. Unit Number : QWM3466(E) A:DEH-15UB/XNUC Unit Number : QWM3469(F) B:DEH-1500UB/XNEW5 Unit Number : QWM3471(H) C:DEH-1500UBA/XNEW5 Unit Name...
  • Page 63 R 255 (A,29,132) RS1/16SS821J R 631 (A,107,92) RS1/16SS473J R 256 (A,19,131) RS1/16SS821J R 632 (A,105,91) RS1/16SS473J R 257 (A,28,131) RS1/16SS223J R 633 (A,107,90) RS1/16SS101J R 258 (A,21,131) RS1/16SS223J R 301 (A,68,127) RS1/16SS471J R 634 (A,103,88) RS1/16SS102J R 635 (A,102,88) RS1/16SS102J DEH-15UB/XNUC...
  • Page 64 R 810 (A,114,21) RS1/10SR220J C 258 (A,20,131) CCSSCH101J50 R 813 (A,107,16) RS1/10SR222J C 261 (A,6,133) (A,F) CCSSCH101J50 (A,6,133) (B,C,D,E,H) CKSSYB102K50 R 814 (A,101,19) RS1/10SR222J C 301 (A,69,129) CKSRYB224K16 R 815 (A,100,19) RS1/16SS822J C 303 (A,80,129) CKSRYB224K16 R 816 (A,96,19) RS1/10SR222J DEH-15UB/XNUC...
  • Page 65 C 917 (A,145,46) CKSSYB102K50 C 553 (A,15,110) CKSSYB103K16 C 919 (A,151,42) 4.7 uF CCG1201 C 555 (A,25,112) CKSSYB682K25 C 921 (A,135,42) 4.7 uF CCG1201 C 923 (A,159,41) 4.7 uF CCG1201 C 556 (A,32,120) CEVQW221M6R3 C 926 (A,140,44) 4.7 uF CCG1201 DEH-15UB/XNUC...
  • Page 66 (B,54,9) (A,B,C,D,F,H) RS1/10SR0R0J R 1990 (B,19,22) (A,B,D,F,H) RS1/4SA821J D 1977 (A,113,6) LED(Red) (A,B,D,F,H) SML-D12V8W(PQ) (B,19,22) (C) RS1/4SA122J (A,113,6) LED(C) SML-D12D8W(RS) D 1978 (A,124,6) LED(Red) (A,B,D,F,H) SML-D12V8W(PQ) R 1993 (B,14,18) (A,B,C,D,F,H) RS1/10SR0R0J (A,124,6) LED(C) SML-D12D8W(RS) D 1979 (A,135,6) LED(Red) (A,B,D,F,H) SML-D12V8W(PQ) DEH-15UB/XNUC...
  • Page 67 RS1/16SS471J Motor Unit(SPDL) CXE2273 R 296 (B,34,43) RS1/16SS0R0J Motor Unit(LOAD/CRG) CXC4026 R 301 (A,27,9) RS1/16SS0R0J R 302 (A,28,9) RS1/16SS0R0J R 303 (A,27,11) RS1/16SS123J R 304 (A,28,11) RS1/16SS123J R 305 (A,26,9) RS1/16SS102J R 306 (A,26,11) RS1/16SS472J R 307 (A,25,9) RS1/16SS102J DEH-15UB/XNUC...

Table of Contents