Monitor Controls - Side Panels - Lorex SG5550 Instruction Manual

MONITOR CONTROLS – SIDE PANELS
1
2
3
1. Audio Sensitivity - Sets the sensitivity level for the alarm Audio
triggering (refer to page 10 for more information).
2. ON/OFF Switch - Switches the power on the monitor ON or OFF.
3. DC Input Jack - Connect to the supplied 6V DC 800 mA AC adapter.
Note: If Power is connected via the Docking Station, this input is not
required as the monitor will draw Power from the Docking Station.
4. Belt Clip / Stand - in the upright position, this clip serves as a belt clip
for convenient portability. You can also lower this piece to serve as a
Stand for the monitor (without the Docking Station).
5. Battery Compartment – Requires 4 "AA" Batteries (not included).
6. Brightness Control - Allows you to adjust the brightness of the picture.
7. Volume Control – Turn this dial to adjust the volume on the monitor.
4
5
4
6
7