Page 1
Assembly Instructions Water Drop IMPORTANT AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT YOUR OWN RISK ASSESSMENT BEFORE ATTEMPTING TO USE THIS PRODUCT. Included with your Water Drop: The unit in its bag Balloons Rubber Bands Version 1.1...
Page 2
Set up: The unit is formed of: a metal frame, that will need to be assembled, and a printed sheet. This unit can be set up and packed away by one person, who has had proper manual handling training and uses the correct equipment to move the inflatable.
Page 3
The next step is to connect the upper metal frame to the lower part – as seen in the image below. Fig. 3 Now you can insert the water drop cage to the upper left part of the metal frame – as seen below. Fig. 4...
Page 4
After the banner is fixed on the frame you can fix the outer target ring and fix it with the 3 bolts ds5fhf provided. Fig. 7a-b-c. Fig. 7a Fig. 7b Fig. 7c Do not forget to secure the metal pole behind the water drop cage with a rubber band, as seen in fig. 8. Page 4 of 5...
Page 5
Fig. 8 Place the water filled balloon into the water drop cage and start aiming at the target. Disassembling the unit: The first step is to take the target off, then the sheet, fold it in half (fig.9a), and roll it up so it fits in its bag.
Need help?
Do you have a question about the Water Drop and is the answer not in the manual?
Questions and answers