Advertisement
Available languages
Available languages
Start to configure the wireless switch 4 scenes
Press the configuration button of the Control Module or press the middle of the General
Control until its light briefly turns green, and then stop pressing. The indicator light of the
products that you have wired will turn green.
> 3 s
Power the wireless switch 4 scenes
Remove
the battery's
protective strip
to power
the wireless
switch
4 scenes.
OR
1
The 2 indicator lights of the wireless switch will go
to green and then switch off. The wireless switch 4
scenes is ready to use.
Press briefly on one of the buttons of the
wireless switch 4 scenes to activate it. The
indicator light will flash green.
2
2
Advertisement
