Product Overview; Operation; Starting The Attachment; Specifications - Toro Flex-Force Power System 51810T Operator's Manual

Product Overview

1. Battery latch
2. Run trigger
3. Lockout button

Specifications

Model
Charger Type
Battery Type
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use the battery pack at
Use the trimmer at
Store the trimmer at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
Figure 4
4. Harness/strap collar
(harness/strap sold
separately)
5. Auxiliary handle
51810T
88610, 88602, or 88605
88620, 88625, 88640, 88650,
88660, or 88675
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)*

Operation

Starting the Attachment

WARNING
Do not attempt to operate the power head
without an attachment installed.
Read and follow the Operator's Manual for
your specific attachment before operating the
power head.
1. Ensure that the vents on the attachment, power
head, and battery are clear of any dust and
debris.
g372329
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch.
4. To start the attachment, press the lockout button,
then squeeze the run trigger
Note:
Slide the variable-speed switch to
change the speed of the attachment.
8
(Figure 5).
Figure 5
(Figure 6).
g357444