Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
AX12P / AX12T / AX15P / AX15T /
AX15B / AX16P
Screen Size: 33 - 70"
Guide Max. Weight: 60kg
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol AX12P
Summary of Contents for Unicol AX12P
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
-
Page 2: Tools Required
01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver M5 Allen Key M6 Allen Key Rubber Mallet 17mm Spanner COMPONENTS DESCRIPTION 1500mm Mast with Power Socket Axia Trolley Base Universal Mount Arms Universal Mount Backplate 7.5cm Castors (2 standard, 2 braked) - Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 With mast laying flat on a table (as shown above) Once secure, stand the stand/trolley upright and pick up the base with the help of another person place on a flat, stable surface.If building the trolley and offer the base to the mast.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Using another team member, lift the screen up and Once centered, ensure the bottom screws are not gradually offer it up to the back plate. Gently tilting screwed tight and screw down the top screws to the screen forward, hook the arms over the lip of level the screen.
- Page 5 01865 767676 sales@unicol.com www.unicol.com BOLT DOWN STEP 1a STEP 2a Once secure, stand the stand/trolley upright and With mast laying flat on a table (as shown above) place on a flat, stable surface. Mark position of pick up the base and offer the base to the mast.