LG CineBeam HU70LS.AEU Owner's Manual page 60

12
Manually Setting the Universal Remote Control
If the universal remote control is not automatically set or it is connected to the AV
input/Component input, you can manually set it.
1
(Q. Settings)
Select the
2
Select the type of the device you want to set.
3
Complete the settings for the universal remote control according to the
guidance on the screen.
You can change or cancel the universal remote control settings.
• This feature can only be used with the Magic Lighting Remote. (The provided
remote control differ depending upon model.)
•
Some models may not be supported.
• AV input/Component input ports are available in certain models only.
•
When changing the settings, check that the device to be changed is turned on.
• You can set up the universal remote control with the latest updated information.
•
The manual setting feature for universal remote control is not supported for a
game console.
• Some buttons may not work depending upon the model of the external device.
•
Place the device near the projector for seamless operation.
• If there is an obstacle in front of the device, it may not be able to receive the
signal properly. If the device is in a drawer, open the drawer.
[Connection] [Device Connector].