LG CineBeam HU70LS.AEU Owner's Manual page 118

70
Connecting and Using an Audio Device Wirelessly
(Q. Settings)
You can connect wirelessly a Bluetooth audio device or a Bluetooth headset to enjoy
your projector's sound in richer quality and greater convenience.
• If you have recently connected device that the sound bar supports LG Sound
Sync, this feature automatically tries connecting to that device.
•
In some devices, this feature automatically tries connecting to the recently
connected device when the projector is turned on.
• We recommend that you connect an LG audio device that supports LG Sound
Sync, using LG TV mode or LG Sound Sync mode on device.
•
Some models may not be supported.
• Press [DEVICE SELECTION] to view the connected devices or the devices that
can be connected to connect any one of them.
•
You can use the projector remote control to adjust the volume of some
Bluetooth devices.
• If the device fails to connect, check the power of the device to connect to and
check if the audio device is working properly.
•
Depending on the type of the Bluetooth device, the device may not connect
correctly or an abnormal behavior may occur such as unsynchronized video and
audio.
• Sound may stutter or sound quality may be reduced if:
– the Bluetooth device is too far from the projector;
– there are obstacles between the Bluetooth device and the projector; or
– used together with radio equipment such as a microwave oven or wireless
LAN.
•
If the [Picture Mode] is set to [Game] and [Sound Out] is set to [Bluetooth],
[Picture Mode] changes to [Standard].
• Using Bluetooth speakers that support Dual mode/Double mode/2-Channel
mode together with the Magic Lighting Remote may limit the speakers' usability.
[Sound] [Sound Out] [Bluetooth]