Dyna-Glo M486BBDG14-D Manual page 11

ASSEMBLY INSTRUCTIONS
9. Carefully place the grill body (C1) onto the cart
left side panel and cart right side panel (H&E).
Adjust the grill body (C1) so that the holes in
the grill body (C1) are aligned with the holes in
the tabs of the cart side panels (H&E).
NOTE: Make sure the gas hose/regulator
assembly is outside the cart. Fasten the grill
body (C1) using 2 screws (AA) and plain
washer (BB) on each side.
Hardware Used
M6x12 Screw
AA
BB
M6 Plain Washer
10. Secure support for left side burner
table (Q) to left side burner table assembly (T)
using 2 screws (DD).
Secure support for right side table (X) to right
side table assembly (Z) using 2 screws (DD).
Hardware Used
M4x12 Screw
DD
9
x 4
x 4
10
x 4
Z
11
C1
H
BB
AA
T
DD
Q
DD
X
E