Advertisement
Drilling in wood
Holes in wood can be made with the same twist
drills used for metal. These bits may overheat
unless pulled out frequently to clear chips from
the flutes.
For larger holes use Auger bits.
Use a block of wood to back up workpieces that
may splinter.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D
WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Unplug the charger before cleaning the housing
with a soft cloth.
Remove the battery pack before cleaning your
power tool.
Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.c om.
Rechargeable battery pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
WALT product
E
WALT provides a facility for the collection and
WALT products once they have
E
WALT office at the address indicated in this
R
un the battery pack down completely, then
remove it from the tool.
Li-Ion,
NiCd and NiMH cells are recyclable.
Take them to your dealer or a local recycling
station. The collected battery packs will be
recycled or disposed of properly.
ENGLISH
WALT
E
13
Advertisement
