Reversible Door - Frigidaire FRT22QRGW3 User Manual

Reversible Door

Instructions
1. Snap off hinge cover at top of cabinet.
With the freezer door closed, remove the
three screws attaching upper hinge to
cabinet. Note: Hinge has a minimal spring
load. Hold bracket when removing last
screw. Lift the hinge up and off. Be sure
to save screws and hinge for
reassembly later.
(Third, outer-most
screw is left in place.)
4. Remove hole plugs from the non-hinge
side of the following:
• the top of the cabinet
• the top of the freezer door
• the third, outermost screw hole in center mullion
Reinstall on opposite side. If damaged from
removal, use new plugs included in literature
pack (some models).
Your refrigerator is equipped with convertible door hinges. Hinging of the door can
be changed to the opposite side any time you wish. An envelope containing extra
plastic hole plugs is included in some models. Turn the refrigerator control to OFF.
Remove all food, bottles, and other items from the door. Begin with freezer door.
Completely remove one door before beginning the other.
2. Open the freezer door enough to allow
it to be lifted off the center hinge.
Hole Plugs
Hole Plug
5. Remove the toe grill from front of
refrigerator by pulling straight forward.
Remove the two hex head bolts attaching
the lower hinge. Save the hinge and
washer(s) for reassembly.
Hinge Pin
3. With the refrigerator door closed, remove
center hinge pin. (Note the arrangement of
the upper and lower washers on the hinge
pin. The washers must be assembled later in
the same manner.) Open refrigerator door
enough to allow door to be lifted off the
lower hinge. Remove the two screws
attaching the center hinge. The third
outermost screw under the center hinge
should be left in place. Save hinge, pin, and
washers for reassembly later. Reinstall
screws in original holes.
Washer
Hinge
Bolt
6. Bolt lower hinge to cabinet on opposite
side. Install washer(s) on the lower hinge
p i n .
8
Washer
Hinge Pin
Hinge
Washer
Screws
Washer
Hinge
Bolt