Table of Contents
Advertisement
Valet Mode
While the vehicle is in valet mode, only the keyless entry function will be available.
Valet Mode is very useful when loaning your vehicle or having it serviced.
In order to enter Valet mode, press Buttons
In order to manually enter Valet Mode, insert your key into the ignition and turn
the ignition on, then off,
You can exit Valet Mode only by pressing Buttons
Timer Start Mode
In Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours,
depending on preset options during the time of installation, for a 24-hour period.
This mode is cancelled automatically after 24 hours or once you start your car with
either the key or remote-pager. In order to enter Timer Start Mode,
press Buttons
simultaneously for a 1/2 second.
Also, note that Timer Start Mode becomes
optional temperature sensor is installed.
Timer Start Mode should be used only in open areas.
Never start and run the vehicle in an enclosed space such
as a garage or carport.
Safety Shut Down Features
The Young Shin Electronics, Inc. 2WAMR system has several shut down safety
features. The following actions will shut down the engine or prevent the car from
auto-starting : Opening the hood, pressing the brake, or if Valet Mode is turned on.
simultaneously for a 1/2 second.
five times within 10 seconds.
simultaneously for a 1/2 second.
once an
Page 14
RPS (Remote Paging System)
The optional RPS is a feature that allows an individual to page you by simply tapping
on the front windshield of the vehicle. RPS is automatically turned on upon activating
alarm mode (pressing button I for a 1/2 second) on the Young Shin Electronics, Inc.
2WAMR .
The RPS module can be activated by tapping a key on the glass, opposite of the
sensor, producing a high-frequency vibration. This high-frequency vibration is
detected and your remote-pager will beep and a telephone icon will appear on the
GLO LCD indicating that someone is paging you from your vehicle.
Press Button
or
for a 1/2 second to deactivate the RPS visual and
audible paging alerts.
OPTIONAL PROGRAMMABLE FEATURES
These additional programmable features can be programmed to the Young Shin
Electronics, Inc. system by your authorized Young Shin Electronics, Inc. dealer.
Ignition Lock
This progammable option will automatically lock the vehicle doors once the key is in the ignition
and the brake pedal is pressed. The doors will unlock as soon as the key is removed from the
ignition.
This progammable option will automatically lock the vehicle doors once the key is in the ignition
and the brake pedal is pressed. The doors will automatically unlock when the emergency
brake is set while the vehicle is running with the key.
Passive Arming
You can turn this function on or off by pressing buttons
When set to passive arming, your security system will arm automatically 30
seconds after all the car doors are closed. There are two types of passive arming
that can be programmed by your Young Shin Electronics, Inc dealership:
(1) passive arming with passive lock and (2) passive arming with active lock.
for a 1/2 second.
Page 15
Advertisement
Table of Contents
