Commercial vehicle systems radio ready receiver with bluetooth cd/mp3/usb/ipod/aux/bluetooth/receiver (21 pages)
Summary of Contents for Delphi DVDM1020
Page 1
10.2" LCD Overhead Monitor with DVD Player DELPHI MOBILE VIDEO DVDM1020 U S E R M A N UA L Important: This manual contains important safety and operating information. Please read and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your DVDM-1020 and/or to your vehicle.
Failure to do so may result in an accident and personal injury, death, and/or Section 1: Unpacking DVDM1020 ... 3 property damage to your DVDM1020 and/or vehicle.
(factory installed) Installation Guide Note: Installation materials sold separately include a shroud for a professional fit. Delphi highly recommends that you contact a professional to ensure proper installation. To locate a professional installer in your area, contact your retailer. It is your sole responsibility that installation is completed properly and will not result in personal injury, death, and/or damage to your DVDM1020 and/or to your vehicle.
SECTION 3: CONTROLS LCD PANEL Reverse Forward Pause/play Volume down Volume up Menu Display Displays an on-screen display (OSD) menu for control of disc, monitor, FM transmitter, IR transmitter, and A/V source functions. When in “Display” mode, press again to return to normal play. •...
Page 5
When in “Display” mode, press again to return to normal play. Mutes all audio. Press again to return MUTE audio. Turns DVDM1020 on or off. POWER Returns to main menu of a video CD. Stops play and ejects disc. EJECT Selects a highlighted option.
1. Insert a disc (label side facing up) in the unit’s slot. OPERATING THE DOME LIGHTS Caution: If DVDM1020 is in A/V mode, it will not accept The dome lights are integrated into DVDM1020 a disc. Do not force the disc into the slot as this could and are controlled by a two-step button.
SELECTING TRACK SECTION 5: OSD COMMANDS AND SETTINGS 1. From the main OSD menu, select “DVD/VCD/MP3/CD.” An on-screen display (OSD) directs you through various setup and adjustments such as picture 2. Select “Track.” Use the navigation buttons shape and quality, as well as FM transmitter, IR to highlight the desired chapter or track transmitter, and A/V source settings.
Page 8
Pressing again sets selecting this option. Use the buttons to point “B.” DVDM1020 will continue to play select “Disc” to repeat the entire disc, the selected section between these two “Title” to repeat the current title, or points until “A to B”...
Page 9
1. From the main OSD menu, select “DVD/VCD/MP3/CD.” The wireless FM transmitter can be used to 2. Select “RND/INT.” Continue to press transmit audio from DVDM1020 to your vehicle ENTER cycle through three options: radio. • “Shuffle” to play all tracks or files in a random order.
SECTION 6: OTHER FEATURES AND PARENTAL CONTROLS 1. Select “Display.” When disc play is stopped, or there is no disc 2. DVDM1020 allows you to change a variety of inserted, selecting “Status” mode from the display settings, including: “DVD/VCD/MP3/CD” menu brings up a menu •...
SECTION 7: TROUBLESHOOTING Your DVDM1020 is designed and built to provide you with trouble-free performance. If it does not appear to be functioning properly, please follow these troubleshooting guidelines. Poor in-vehicle radio reception: Can’t advance or reverse scan: Check the condition of the vehicle’s radio antenna.
SECTION 8: WARRANTY WARRANTY Delphi Product & Service Solutions (“Delphi”) warrants all Delphi Mobile Video products sold by Delphi (“Products”) to be free of defects Some states do not allow limitations on how in material and workmanship, subject to the following conditions.
Need help?
Do you have a question about the DVDM1020 and is the answer not in the manual?
Questions and answers