Parameter
Enter Configuration Menu
(Note)
Only Supported when Configured VLAN List is set to Enabled.
BIOS Setup
Description
Press [Enter] to configure advanced items.
Create new VLAN
VLAN ID
– Sets VLAN ID for a new VLAN or an existing VLAN.
– Press the <+> / <-> keys to increase or decrease the desired values.
The valid range is from 0 to 4094.
Priority
– Sets 802.1Q Priority for a new VLAN or an existing VLAN.
– Press the <+> / <-> keys to increase or decrease the desired values.
The valid range is from 0 to 7.
Add VLAN
– Press [Enter] to create a new VLAN or update an existing VLAN.
Configured VLAN List
– Enable/Disable the VLAN.
– Options available: Enable/Disable. Default setting is Disabled.
Remove VLAN
– Press [Enter] to remove an existing VLAN.
- 74 -