Advertisement
Step 1
Main connection
(may be done by an engineer)
• Before installation, go through the
Checklist to prepare your connection.
• If you have an appointment with an engineer, skip this step.
• If you do not have an appointment with an engineer, check if
your optical fibre box is complete, as illustrated below.
• Determine which type of connection box is present in your
home and where it is located.
• Connect the supplied red cable with red connectors to
the first or only Ethernet port on your connection box.
• Connect your connection box to the power outlet with
the power adapter provided.
• The 'Power' and 'Glas' lights should be lit continuously.
• You can consult or download the interactive user manual at
kpn.com/handleidingen.
Connection box
Connection box
Power
Glas
Ethernet
NT
OR
Connection box
Connection box
Genexis
1
2
1
Power
Glas
NT
Ethernet
Red connector
of fibre optic
Power
Alarm
PON
LAN
Step 2
Connecting
the Experia Box
• Click the stand onto the bottom of the Experia Box.
• Take the red cable with red connectors and connect the prepared
connection box to the red [WAN] port on the Experia Box.
• Connect the power adapter to the [POWER] port on the Experia Box
and insert the adapter into the wall power outlet.
• Switch on the Experia Box using the white [ON/OFF] button on
the side and wait until the 'Services', 'Internet', 'Wireless' and 'Power'
lights turn green.
cable
Experia Box
(side)
Stand
Power adapter
PC
TV
1
Services
ECO
Internet
Wireless
Power
Socket
Lights
Advertisement
