Appendix For Professional Fitters - Pace Mi3 User Manual

APPENDIX FOR PROFESSIONAL FITTERS

This page of this guide is for professional fitters only and not for the
end-users of this set-top box.
Fitting a WiFi adapter
WARNING: Before you attempt to fit the WiFi adapter, ensure that the
set-top box is NOT powered up.
Removing the cover
Use a torx screwdriver of a suitable size to remove the screw from the end
of the cover. Slide the cover away from the set-top box.
Inserting the WiFi adapter
Slide the adapter into position, pushing gently but firmly to engage the
USB connector on the adapter with the USB port on the set-top box.
A Philips-head screw, with its washer, is supplied with the adapter
(attached to the adhesive on the bubble-wrap that protects the adapter).
Insert the Philips-head screw, with its washer, into the end of the adapter
and tighten it up using a Philips screwdriver.
Do NOT use the torx screw that you removed from the cover to
fix the adapter into position.
NOTE
Mi3 (IPW9001) USER GUIDE (501-2C14501)
WiFi adapter Remove this cover to fit the adapter.
Torx fixing screw on cover
Pull cover away from set-top box.
Push adapter gently but firmly into position.
Philips-head fixing screw on WiFi adapter
12