Westell Technologies PS71090-P8 User Manual page 44

Item #
5
Item #
6
Item #
7
©2017 Westell Technologies
1.877.844.4274
Downlink
Gain [dB] Displays downlink gain
Atten [dB] Sets attenuation value
AGC Atten [dB] Displays attenuation value controlled by AGC
AGC Control Auto Level Control Function On/Off
Sets the unit's maximum ALC output value
AGC Level [dBm]
HPA Downlink HPA On/Off
Gain (dB) Displays status of the uplink gain
Atten [dB] Sets the attenuation value
AGC Atten [dB] Displays attenuation value controlled by AGC
AGC Control Auto Gain Control Function On/Off
Sets the unit's maximum AGC output value
AGC Level [dBm]
HPA Uplink HPA On/Off
Isolation
Isolation Value
Isolation
Isolation Recheck
Note: Neither the isolation check nor recheck will indicate a change in power
levels if the unit's own power has been switched off.
PS71090-P8 Product Manual
Section
Section
Section
When power is on, an isolation check is performed
and the values display.
The isolation check can be performed with the RF
on or off.
The isolation check can be performed with the RF
on or off.
March 2018; Doc No. CS14000802UM rA
March 2018, Rev A
WESTELL.COM
Page 44 of 52