Westell Technologies PS71090-P8 User Manual page 39

Item #
Item #
4
Item #
5
Item #
6
Item #
7
©2017 Westell Technologies
1.877.844.4274
800MHz Band
Downlink
Gain [dB]
Output (dBm)
AGC Level [dBm]
HPA
Uplink
Gain (dB)
UL Output [dBm]
ALC Level [dBm]
HPA
Isolation
Isolation Value
Isolation
Note: Neither the isolation check, nor recheck, will indicate a change in
power levels if the unit's own power has been switched off.
Alarm Status Not User-Configurable/Informational Only
( GREEN = Normal; RED = Alarm )
PLL LD Display alarm
PS71090-P8 Product Manual
Section
Allows sub-band 3 to be set to Select
Section
Displays downlink gain
Displays Output value
Displays Automatic Gain Control Level
Displays Downlink HPA On/Off
Section
Displays status of the uplink gain
Displays uplink output level
Displays Automatic Gain Control Level
Displays Uplink HPA On/Off
Section
When power is on, an isolation check is
performed and the values are displayed
The isolation check can be performed with the
RF on or off
Section
March 2018; Doc No. CS14000802UM rA
March 2018, Rev A
WESTELL.COM
Page 39 of 52