Fresh Food Storage; Shelf Adjustment; Door Storage - Frigidaire FRT21IQRJZ1 User Manual

Fresh Food Storage

Sliding Shelf
Cantilever Shelf
Combination Cantilever/Sliding Shelf with
Plastic Clip
Bin Snugger
Bin
Micro-Serve Dish Tray

Shelf Adjustment

Refrigerator shelves are easily adjustable to suit individual needs. Before adjusting
shelves, remove all food. The shipping clips, which stabilize the shelves for shipping
may be removed and discarded.
Remove Shipping Clips
wall.
SpillSafe™ glass shelves (some models) catch and hold accidental spills. In some
models, the SpillSafe™ shelves slide out for easy access to food and fast cleaning. The
shelves slide out independently of the cantilever brackets. Just pull front of shelf
forward. Shelf can be extended as far as stopper will allow and is not removable from
the cantilever bracket.

Door Storage

Door bins and shelves are provided for convenient storage of jars, bottles, and cans.
Items used often are available for quick selection.
Some models have adjustable door bins which can be moved to suit individual needs.
To move the bins, remove by lifting straight up. Place the bin in the desired position
and lower over supports.
The Dairy Compartment is warmer than the general food storage section and is
intended for short term storage of cheese, spreads, or butter.
Micro-Serve Dishes
Food can be stored, cooked*, and served in Micro-Serve Dishes provided in some
models. These dishes slide easily into their own tray, which hangs below a door gallon
bin, conveniently freeing shelf space for other items. See illustration.
* Remove plastic lid before cooking. Lid is intended for storage only.
Micro-Serve Dishes
6
To adjust sliding shelves, remove by pulling forward to the
stop position, then lift the front edge up and pull out.
Replace on any pair of rails by reversing this procedure.
To adjust cantilever shelves (shelves supported at the rear
of the refrigerator), lift the back of the shelf up and out.
Replace shelf by inserting hooks at rear into wall bracket.
Lower and lock into position.
To adjust combination cantilever/sliding shelves, remove
shelf by lifting hooks up and out of rear wall bracket. Then
flex plastic clip towards center of refrigerator and pull shelf
straight out. Replace shelf by sliding plastic clip past side
wall support. Then lock hooks at rear into wall bracket.
NOTE: Plastic clip will automatically fit secure against side
(some models)